; SONIX String Table 
; format <stringid>=<string>
;
; Rules for creating new string table entries:
;  1. Do not create duplicates.  If an entry already contains the exact 
;     (case sensitive and punctuation) string as the one you need then 
;     use it instead of creating a new one.
;  2. Do not create duplicates with similar meanings.  If an entry already exists
;     which means the same thing as the string you want then consider using the
;     existing entry instead.
;  3. Do not change existing strings just for the sake of it.  Discuss the change 
;     with the technical writer first.  Spelling mistakes can be corrected.
;

; Generic

general.dlg.apply=&Apply
general.dlg.cancel=&Cancel
general.dlg.ok=&Ok
general.dlg.yes=&Yes
general.dlg.no=&No

startup.info=For more information, please visit
startup.website=www.ultrasonix.com
startup.corporate.main=Complete Ultrasound Solutions
startup.daq.main=Parallel raw data for research.
startup.daq.tagline=Parallel Channel Acquisition
startup.gps.main=Now you can see where the needle goes
startup.gps.secondary=World's first freehand biopsy technology.
startup.gps.tagline=Guidance Positioning System
startup.hub.main=Ultrasound credentialing and billing made easy.
startup.hub.tagline=An Ultrasonix Innovation
startup.mdp.main=Full Featured Ultrasound Systems.
startup.touch.main=Application-Specific Ultrasound Systems.
startup.touch.secondary=Customized for what you do.
startup.upgrade.main=New upgrade path to version 5 software!
startup.upgrade.secondary=Your previous SonixOP and SonixSP is now supported by our version 5 software!
startup.upgrade.point1=- Performance improvements
startup.upgrade.point2=- Improved B and Color Doppler
startup.upgrade.point3=- New feature support
startup.upgrade2.main=Upgrade to the new OP/SP 2010
startup.upgrade2.point1=- Familiar interface
startup.upgrade2.point2=- Improved hardware for enhanced image quality
startup.upgrade2.point3=- OpenSONIX REV3
startup.upgrade2.point4=(8x more channels, 14 bit ADC, CW beamformer)
startup.sonix6.main=COMING EARLY 2012
startup.sonix6.secondary=A leap forward in image quality from Ultrasonix.
startup.sonix6.register1=Register now to get it first:
startup.sonix6.register2=www.ultrasonix.com/sonix6

startup.corporate.main.senomedical=Opto-acoustic Imaging Solutions
startup.website.senomedical=www.senomedical.com

qasetup.title=QA SETUP
qasetup.reviewertab=Reviewers

threed.freehand.title=FREEHAND 3D
3dconfig.presetcolumn=Presets
3dconfig.ondelete=This will delete the selected preset.\n\nDo you want to continue?
3dconfig.length=Length
3dconfig.angle=Angle

threed.threedview.choosepixelformatfail=ChoosePixelFormat failed
threed.threedview.setepixelformatfail=SetPixelFormat failed
threed.measurements.warning=Measurements performed on an acquired Freehand 3D image may be inaccurate as the accuracy of the Multiplanar Reconstruction is very user-dependent.\nMeasurements performed on an acquired Freehand 3D image should be used for informational purposes only.
threed.tabs.display=DISPLAY
threed.tabs.render=RENDER
threed.tabs.user=USER
threed.tabs.multislice=MULTISLICE
threed.renderdir.top=Top
threed.renderdir.bottom=Bottom
threed.renderdir.front=Front
threed.renderdir.back=Back
threed.renderdir.left=Left
threed.renderdir.right=Right

annotationspage.pagetemplate=&Page %d/%d
annotationspage.ondelete=Do you really want to delete the annotation page?

initdlg.initialize=Initializing...
initdlg.continue=Continue
initdlg.examphraseversion=Version %s
initdlg.start.electronics=Starting Electronics...
initdlg.start.touchscreen=Touch Screen Detected...
initdlg.start.memory=Running Memory Tests...
initdlg.start.reporting=Loading Reporting Module...
initdlg.start.console=Starting Console...
initdlg.start.status=Loading Status Monitor...
initdlg.start.tables=Loading Measurement Tables...
initdlg.start.modem=Modem Initialization...
initdlg.start.support=Loading Online Support...
initdlg.start.maps=Loading Maps...
initdlg.start.patient=Loading Patient Module...
initdlg.start.gui=Loading Graphical Interface...
initdlg.start.research=Loading Research Package...
initdlg.start.dicom=Loading DICOM...
initdlg.start.waitmemory=Waiting for Memory Tests...
initdlg.start.electronictests=Running Electronics Tests...
initdlg.start.firmware=Loading Firmware...

initdlg.console.firmware=Updating the console firmware.  Please wait...
initdlg.console.fpga=Updating the console firmware (FPGA).  Please wait...

initdlg.fail.translation=Failure: Translation Database
initdlg.fail.console=Failure: Connecting to Console
initdlg.fail.maps=Failure: Loading Maps
initdlg.fail.gui=Failure: Loading GUI... shutting down
initdlg.fail.memorytests=Failure: Waiting for Memory Tests
initdlg.fail.components=Failure: Fail Component test
initdlg.fail.electronics=Failure: Electronics Initialization
initdlg.fail.firmware=Failure: Loading Firmware
initdlg.fail.phasealign=Failure: Phase Alignment test

archivesystemsdlg.column.sonixhub=SonixHUB
archivesystemsdlg.column.digisonics=Digisonics
archivesystemsdlg.column.practicehwy=PracticeHwy
archivesystemsdlg.column.ehealth=EHealthConx

ehealthpage.msg.connectionsuccess=Connection test success.
ehealthpage.msg.connectionfailed=Connection test failed. Error: %s (%d).

biraddlg.title=BIRADS ASSESSMENT
biraddlg.birad0=BI-RADS 0
biraddlg.birad1=BI-RADS 1
biraddlg.birad2=BI-RADS 2
biraddlg.birad3=BI-RADS 3
biraddlg.birad3a=BI-RADS 3a
biraddlg.birad3b=BI-RADS 3b
biraddlg.birad4=BI-RADS 4
biraddlg.birad4a=BI-RADS 4a
biraddlg.birad4b=BI-RADS 4b
biraddlg.birad4c=BI-RADS 4c
biraddlg.birad5=BI-RADS 5

buttoneditor.title=Button Style Editor
buttoneditor.ribbonpage.tooltip0=Right Click to insert or delete item

consolereportdlg.title=CONSOLE REPORT
consolereportdlg.commenttemplate=\n\n****** Comments ******\n%s\n
consolereportdlg.defaulttext=Please note whether or not the LEDs on the Console are lit.

systemsettings.loginpassword=Login Password

main.failedsetup=Unable to load the preset: '%s'.
main.notransducer=TRANSDUCER NOT DETECTED
main.unsupportedtransducer=UNSUPPORTED TRANSDUCER
main.loadconsole=Preparing the Console.  Please wait...
main.researchmode=Research Mode is now activated.\n\nWarning: This mode should be used for investigational purposes only.
main.noworksheet=No worksheet available for the selected study.
main.presetclash.emed=The user preset, %s, already exists for the %s application.\nSelect OK to overwrite this existing preset with your new changes.
main.presetclash.nonemed=The user preset, %s, already exists for the %s application.\nSelect YES to overwrite this existing preset with your new changes, or\nselect NO to save your changes as a new preset.
main.onwarn.ups=Shutting down while on battery power.\nPlease connect to AC power to prevent the UPS from draining completely.
main.onwarn.battery=Shutting down while on battery power.\nPlease connect to AC power to prevent the battery from draining completely.
main.onrequirepatient.noselect=This action requires a patient to be selected.
main.onrequirepatient.select=This action requires a patient to be selected.\n\nWould you like to select a patient?
main.carrymeasurements=Measurements were just made during an empty exam.\n\nWould you like to carry these measurements forward into the new exam?
main.confirmshutdown=Do you really want to shutdown the system?
main.imageerrortitle=Image Acquisition
main.short3dacquisition=The acquisition was too short, at least %d\nframes must be acquired to create a volume.
main.wrongversion.raw=Raw Data
main.wrongversion.3d=3D Volume
main.wrongversion.text=The file is incompatible with the current software version.
main.3derrortitle=3D Acquisition
main.3dqualitysetting=Quality
main.onrestartsoftware=Are you sure you want to restart the software?
main.onstandby=Preparing to stand by...
main.onhibernate=Preparing to hibernate...
main.hibernation=Hibernation
main.standby=Stand By
main.ipaddress=The IP address of this system is %s
main.on3dmaxframes=Maximum number of images per volume has been reached.
main.bcad.error.report=Error opening report file.
main.bcad.error.generate=Failed to generate B-CAD report.
main.bcad.error.assessment=B-CAD report can not be generated without a confirmed BI-RADS assessment.
main.bcad.error.riskassessment=B-CAD analysis was unable to make a risk assessment.
main.noconnections=No Connections
main.diskspace.low.title=Low Hard Drive Space
main.diskspace.low.message=The patient data hard disk is almost full.\nPlease refer to the User Manual for instructions on exporting patient data.
main.UPSShutdownWarning=Battery power low.\nSystem will shutdown in 2 minutes.\nPlease connect to AC power.
main.techboardrestart=The console is not responding.  Click 'Retry' to attempt to restart the console.  Click 'Cancel' to shutdown the console.
main.examrunning=Instance of Exam is already running.
main.keyboard= keyboard.
main.keyboardenglish=English keyboard.
main.3dCineSave=Saving Cine Loop.
main.abus.lostcommunication=Embrace motor lost communication! Please check the USB connection before clicking ok. The system will attempt to re-establish connection. 
main.abus.checkstartposition=The motor is %d STEPS from home position (Required: < %d STEPS)! \nPress the HOME button, wait for the motor to go home. \nAnd try the acquisition again!

usermanualdlg.title=DOCUMENTATION SETTINGS
usermanualdlg.confirmremovemanual=Do you really want to delete '%s'?
usermanualdlg.defaultmanualremove='%s' is marked as the Default User Manual.\nThe Default User Manual cannot be deleted.

hwtest.noprobemsg=No transducer connected.\nDefaulting to transducer with ID=1
hwtest.passmsg=All channel tests [PASS]\nPlease exit HWTest
hwtest.failmsg=*** Channel tests [FAIL] ***\n---  Check system setup  ---
hwtest.nospreadsheetmsg=A spreadsheet application could not be opened.\nPlease install Excel or OpenOffice Calc and try again.
hwtest.testvectorfailmsg=*** [FAIL]: Test Vector Ch. %d. Expect: %d/%d, Measure: %d/%d ***
hwtest.testnoisefailmsg=*** [FAIL]: Noise Test (")+strLine+_T(") Ch. %d. Expect: < %d, Measure: %d ***

patient.patientinfo.preclinical.animalinfo=Animal Information
patient.patientinfo.preclinical.id=Animal ID
patient.patientinfo.preclinical.strain=Strain
patient.patientinfo.preclinical.investigator=Investigator

patient.worklist.column.id=ID
patient.worklist.column.accession=Accession #
patient.worklist.column.lastname=Last Name
patient.worklist.column.firstname=First Name
patient.worklist.column.examtype=Exam Type
patient.worklist.column.datetime=Date/Time
patient.worklist.column.procdesc=Procedure Description

patient.patientlist.column.id=Patient ID
patient.patientlist.column.lastname=Last Name
patient.patientlist.column.firstname=First Name
patient.patientlist.column.middlename=Middle Name
patient.patientlist.column.birthdate=Birthdate
patient.patientlist.column.sex=Sex
patient.patientlist.column.insurance=Insurance
patient.patientlist.column.lastexam=Last Exam
patient.patientlist.column.images=Images

patient.patientlist.preclinical.column.id=Animal ID
patient.patientlist.preclinical.column.strain=Strain
patient.patientlist.preclinical.column.birthdate=Birthdate
patient.patientlist.preclinical.column.sex=Sex
patient.patientlist.preclinical.column.lastexam=Last Exam
patient.patientlist.preclinical.column.images=Images

patient.ondeletepatient=Do you really want to delete the selected patient?
patient.ondeletepatients=Do you really want to delete the %d selected patients?
patient.patienttestdlg.sqlokmsg=ondeletepatients=Successfully executed the SQL command.
patient.patienttestdlg.sqlfailmsg=Failed to execute the SQL command.  Refer to the log files for details.
patient.inputrequired.text=This field requires user input.
patient.inputrequired.title=Input Required

patient.settingsdlg.title=PATIENT SETTINGS

patient.archivesysdlg.title=EMR SYSTEM SETTINGS

patient.operatorsdlg.title=OPERATORS
patient.operatorsdlg.listcol.id=ID
patient.operatorsdlg.listcol.name=Name
patient.operatorsdlg.listcol.email=E-Mail
patient.operatorsdlg.listcol.protocol=Protocol
patient.operatorsdlg.noprotocolselection=<No Protocol>

patient.studylist.column.id=Patient ID
patient.studylist.column.examdate=Exam Date
patient.studylist.column.examtype=Exam Type
patient.studylist.column.accession=Accession #
patient.studylist.column.operatorid=Operator ID
patient.studylist.column.lastexam=Last Exam
patient.studylist.column.status=Status
patient.studylist.column.images=Images

patient.queuelist.column.id=PID
patient.queuelist.column.lastname=Last Name
patient.queuelist.column.firstname=First Name
patient.queuelist.column.examtype=Exam Type
patient.queuelist.column.examdate=Exam Date
patient.queuelist.column.imagenumber=Image Number
patient.queuelist.column.lastattempt=Last Attempt
patient.queuelist.column.attempts=Attempts
patient.queuelist.column.modality=Modality
patient.queuelist.column.dicomdevice=DICOM Device(s)
patient.queuelist.ondeleteitem=Do you really want to delete the selected item?
patient.queuelist.ondeleteitems=Do you really want to delete the %d selected items?

patient.printqueuelist.column.id=PID
patient.printqueuelist.column.lastname=Last Name
patient.printqueuelist.column.firstname=First Name
patient.printqueuelist.column.examtype=Exam Type
patient.printqueuelist.column.examdate=Exam Date
patient.printqueuelist.column.images=Image Number
patient.printqueuelist.column.attempts=Attempts
patient.printqueuelist.column.lastattempt=Last Attempt
patient.printqueuelist.column.dicomdevice=DICOM Device(s)

patient.createpatientdlg.title=EXAM MANAGEMENT
patient.createpatientdlg.unsupportedapp=None of the connected transducers support the selected application. \n\nTo use this application connect an appropriate transducer and select again.
patient.createpatientdlg.endexam=You are currently in the middle of an exam.  This action will end current exam.\n\nDo you want to continue?
patient.createpatientdlg.dobformatddmmyy=DOB (dd/mm/yyyy)
patient.createpatientdlg.patients=Patients
patient.createpatientdlg.worklist=Worklist
patient.createpatientdlg.storequeue=Store Queue
patient.createpatientdlg.storefaileditems=Store Failures
patient.createpatientdlg.printueue=Print Queue
patient.createpatientdlg.hide=Hide
patient.createpatientdlg.attendingphysician=Attending Physician
patient.createpatientdlg.monthserror=The number of months exceeds 12.
patient.createpatientdlg.ageerror=Questionable Age
patient.createpatientdlg.dateerror=Questionable Date
patient.createpatientdlg.duplicatepatienterror=A patient record with a matching Patient ID already exists.  Continuing will overwrite the existing patient's data.  The existing patient record can be selected from the search list below.\n\nWould you like to replace the existing patient record and continue?
patient.createpatientdlg.patientcreateerror=Could not create patient
patient.createpatientdlg.operatormissing=EHealthConx is enabled.  A valid Operator ID is required.
patient.createpatientdlg.dicomnorecords=No records were found.  The previous worklist has been maintained
patient.createpatientdlg.dicomconnectionerror=Failed to establish a connection with the DICOM Worklist SCP.
patient.createpatientdlg.dicomcancelerror=The search was cancelled.
patient.createpatientdlg.dicomcancelexcesserror=The search produced too many results and only the first %d entries were retrieved.
patient.createpatientdlg.dicomunknownerror=An unknown error occured while communicating with the DICOM Worklist SCP.
patient.createpatientdlg.valueerror=Questionable Value
patient.createpatientdlg.charactererror=Unacceptable Character
patient.createpatientdlg.heartrateerror=The Heart Rate exceeds 300bpm
patient.createpatientdlg.entryeerror=You can only type a number here.
patient.createpatientdlg.weighterror=The weight exceeds %.2f%s
patient.createpatientdlg.heighterror=The height exceeds %.2f%s
patient.createpatientdlg.ageovererror=The age is greater than 150 years.
patient.createpatientdlg.doberror=The birthdate occurs in the future.
patient.createpatientdlg.incorrectpasswordmsg=The password is incorrect.\nPlease try again.
patient.createpatientdlg.incorrectpasswordtitle=Incorrect Password
patient.createpatientdlg.unknownsex=Unknown

patient.importexportdlg.title=EXAM IMPORT/EXPORT
patient.importexportdlg.burnfailmsg=Burn process failed.
patient.importexportdlg.exportcompletemsg=Export process is complete.
patient.importexportdlg.exportfailmsg=Export process did not succeed.
patient.importexportdlg.importcompletemsg=Import process is complete.
patient.importexportdlg.importfailmsg=Import process did not succeed.
patient.importexportdlg.noexportmsg=No exams Exported.
patient.importexportdlg.noimportmsg=No exams Imported.
patient.importexportdlg.duplicatepatientmsg=Duplicate Patient: %s.\r\n%s exams to the existing patient?
patient.importexportdlg.duplicateaddfailmsg=Could not add duplicate exam.
patient.importexportdlg.conatainsexamsprompt=Patient %s contains further exams.\r\nDelete patient and remaining exams?
patient.importexportdlg.deleteprompt=Patient contains further exams.\r\nDelete patient and remaining exams?
patient.importexportdlg.duppatientexportoperationfailmsg=Exams not exported.\r\nDuplicate Patient: %s
patient.importexportdlg.duppatientimportoperationfailmsg=Exams not imported.\r\nDuplicate Patient: %s
patient.importexportdlg.exportlabel=Export
patient.importexportdlg.importlabel=Import
patient.importexportdlg.localpatientdata=Local Patient Data
patient.importexportdlg.nosourcesfound=No sources found
patient.importexportdlg.nodestinationsfound=No destinations found
patient.importexportdlg.noexamsfound=No exams were found

patient.importdlg.faileimportmsg=Error: Failed to import patient: PID=
patient.importdlg.invalidpatientfoldermsg=Warning: An invalid patient folder was detected and was not be imported: PID=
patient.importdlg.duplicatepatientmsg=Warning: Duplicate patient detected and was not be imported: PID=
patient.importdlg.addpatientfailmsg=Error: Could not add patient to database: PID=
patient.importdlg.importokmsg=Info: Successfully imported patient folders
patient.importdlg.invaliddevicemsg=Error: Invalid device selection

patient.sendstudy.configureemailmsg=Please configure the e-mail settings.
patient.sendstudy.configureusersmsg=Please define exam reviewers in the QA Setup dialog.
patient.sendstudy.noreviewersmsg=No reviewers selected.
patient.sendstudy.connectfailsmsg=Status: Failed to connect to the internet.
patient.sendstudy.statusreadysmsg=Status: Ready
patient.sendstudy.statusnoexamssmsg=No exams selected.
patient.sendstudy.statusprintingsmsg=Status: Printing
patient.sendstudy.statusprintingfilesmsg=Printing %s
patient.sendstudy.statussentreportmsg=Status: Successfully Sent Report to the Printer.
patient.sendstudy.statusprintfailmsg=Status: Failed to print worksheet.
patient.sendstudy.statusnoreportsinmsg=Status: No %s reports found in %s.
patient.sendstudy.statusnoreportsmsg=Status: No %s reports found.
patient.sendstudy.statuspdftoolmissingsmsg=Status: PDF utility is not installed.
patient.sendstudy.statuconnectingsmsg=Status: Connecting to SMTP...
patient.sendstudy.statusconnectedsmsg=Status: Connected.
patient.sendstudy.statusconnectfailsmsg=Status: Could not connect.
patient.sendstudy.statusgeneratepdfmsg=Status: Generating %s PDF
patient.sendstudy.statusgeneratepdffailmsg=Status: PDF generation failed
patient.sendstudy.generatepdffailmsg=Could not generate PDF from rpt file in %s
patient.sendstudy.statusmissingpdfmsg=Could not find PDF %s
patient.sendstudy.statusskipexammsg=Status: No attachements found:: skipping exam.
patient.sendstudy.statussendingmsg=Status: Sending message...
patient.sendstudy.statussendfailmsg=Status: Could not send message.
patient.sendstudy.statussenddonemsg=Status: Message sent.
patient.customlistctrl.caption=Searching...

patient.movedefaultdlg.title=ASSIGN EXAM
patient.movedefaultdlg.movemsg=The current exam has not been assigned to a patient.\nWould you like to assign the exam to a patient record?
patient.movedefaultdlg.movematchmsg=The current exam has not been assigned to a patient.\nWould you like to assign the exam to the matching patient record or discard the exam contents?
patient.movedefaultdlg.collisionselectpatient=An exam for this patient/exam type/day already exists.\nSelect another patient or exam type.
patient.movedefaultdlg.continueconfirm=The current exam has not been assigned to a patient.\nAre you sure you would like to resume the current exam?
patient.movedefaultdlg.continueAssignedExam=The current exam has been assigned.\nWould you like to continue with this exam?

patient.fetaltrenddlg.duplicateExam=An exam for that date already exists.  Exam not added.
patient.fetaltrenddlg.examdateddmmyyyy=Exam Date (dd/mm/yyyy)
patient.fetaltrenddlg.examdatemmddyyyy=Exam Date (mm/dd/yyyy)
patient.fetaltrenddlg.imported=Imported
patient.fetaltrenddlg.measurements=Measurements
patient.fetaltrenddlg.value=Value
patient.fetaltrenddlg.notrendablemmts=No trendable measurements\nare available
patient.operatorsdlg.deleteoperator=Are you sure you want to delete this operator?

patient.apppage.gyn.questionabledate=Questionable Date
patient.apppage.gyn.futurelmp=The start date occurs in the future

patient.obdate.lmp=LMP
patient.obdate.oocyte=Oocyte Retrieval
patient.obdate.day3=Day 3 Transfer
patient.obdate.day5=Day 5 Transfer

patient.apppage.ob.celsius=C
patient.apppage.ob.fahrenheit=F
patient.apppage.ob.galmp=GA (LMP)
patient.apppage.ob.eddlmp=EDD (LMP)
patient.apppage.ob.ga=GA
patient.apppage.ob.eddga=EDD (GA)
patient.apppage.ob.gaedd=GA (EDD)
patient.apppage.ob.edd=EDD
patient.apppage.ob.validate.title.questionabledate=Questionable Date
patient.apppage.ob.validate.title.questionablevalue=Questionable Value
patient.apppage.ob.validate.title.outofrange=Out of Range
patient.apppage.ob.validate.title.badchar=Unacceptable Character
patient.apppage.ob.validate.title.badbbtvalue=Questionable BBT Value
patient.apppage.ob.validate.msg.futurelmp=The start date occurs in the future
patient.apppage.ob.validate.msg.largega=The GA is greater than 45weeks
patient.apppage.ob.validate.msg.wrongedd=The EDD gives a GA that is greater than 45weeks
patient.apppage.ob.validate.msg.pastedd=The EDD occurs in the past
patient.apppage.ob.validate.msg.fetuscount=A maximum of %d fetuses is supported.\nPlease enter a number between 1 and %d.
patient.apppage.ob.validate.msg.numericonly=Only numeric values are acceptable.
patient.apppage.ob.validate.msg.bbtrangecelsius=The BBT is outside the normal range of %.2fC - %.1fC
patient.apppage.ob.validate.msg.bbtrangefahrenheit=The BBT is outside the normal range of 93.20F - 104.0F

patient.apppage.other.metric=metric
patient.apppage.other.imperial=imperial

patient.apppage.preclinical.anesthesia=anesthesia type
patient.apppage.preclinical.notes=notes

patientreview.burndlg.title=STORAGE DESTINATION
patientreview.burndlg.dicomstoreprogress=The selected item(s) have been sent to DICOM Storage queue.
patientreview.burndlg.dicomprintprogress=The selected item(s) have been sent to DICOM Print queue.
patientreview.burndlg.printcomplete=Printing is complete.
patientreview.burndlg.examsharingtitle=Exam Export [%s]
patientreview.burndlg.examexportcomplete=Export to %s is complete.
patientreview.burndlg.examexportfailed=Failed to export to %s.
patientreview.burndlg.archivecomplete=Archive process to removable device is complete.
patientreview.burndlg.bmpwarning=BMP is an uncompressed format, therefore Queue Size with this setting will be significantly larger than the one currently displayed.
patientreview.burndlg.cddvdwriter=CD/DVD Writer
patientreview.burndlg.cdwriter=CD Writer
patientreview.burndlg.dicomstoreserver=DICOM Storage Server(s)
patientreview.burndlg.dicomprintserver=DICOM Print Server(s)
patientreview.burndlg.netdrive=[%s] %s (Network Drive)
patientreview.burndlg.removabledevice=[%s] %s (Removable Device)
patientreview.burndlg.localdisk=[%s] %s (Local Disk)

patientreview.imageview.pause=Pause
patientreview.imageview.play=Play
patientreview.imageview.zoom=Zoom
patientreview.imageview.repeat=Repeat
patientreview.mcicontrol.playforward=CINE Play Forward
patientreview.mcicontrol.playreverse=CINE Play Reverse
patientreview.mcicontrol.pause=CINE Pause
patientreview.mcicontrol.close=CINE Close
patientreview.mcicontrol.stepforward=CINE Step Forward
patientreview.mcicontrol.stepback=CINE Step Back
patientreview.mcicontrol.repeat=CINE Toggle Repeat
patientreview.mcicontrol.speedinc=CINE Speed Increment
patientreview.mcicontrol.speeddec=CINE Speed Decrement
patientreview.mcicontrol.zoomreset=CINE Zoom Reset
patientreview.mcicontrol.zoominc=CINE Zoom Increment
patientreview.mcicontrol.zoomdec=CINE Zoom Decrement
patientreview.mcicontrol.fastforward=CINE Fast Forward / Rewind
patientreview.patientnamecol=Patient Name
patientreview.patientnamefld=Patient Name: %s
patientreview.patientidfld=Patient ID: %s
patientreview.patientdobfld=Date of Birth: %s
patientreview.examdatefld=Exam Date
patientreview.examtypefld=Exam Type
patientreview.transferbutton=Transfer...
patientreview.clearbutton=Deselect All
patientreview.deletebutton=Delete
patientreview.fullscreenbutton=Full Screen
patientreview.availablespace=Local Disk Space: %.1f%%
patientreview.unabletocheck=Unable to check disk space.
patientreview.queuesize=Queue Size: 0 Bytes
patientreview.imgmgtgroup=Image Management
patientreview.deletefailed=Failed to delete %s.
patientreview.deleteconfirm=One or more patients are selected for deletion.  Are you sure you want to delete the selected patients?
patientreview.commandimgnext=Image Next
patientreview.commandimgprev=Image Prev
patientreview.commandthumbnext=Thumb Next
patientreview.commandthumbprev=Thumb Prev
patientreview.commandlayoutinc=Layout Increase
patientreview.commandlayoutdec=Layout Decrease
patientreview.commandpatientnext=Patient Next
patientreview.commandpatientprev=Patient Prev
patientreview.commandexamnext=Exam Next
patientreview.commandexamprev=Exam Prev
patientreview.commandstore=Store...
patientreview.commanddelete=Delete...
patientreview.commandclearqueue=Clear Queue
patientreview.commandselpatient=Select Patient
patientreview.commandselexam=Select Exam
patientreview.commandselimage=Select Image
patientreview.commandopenimage=Open Image
patientreview.commandexit=Exit PR
patientreview.commandselall=Select All Patients
patientreview.sizebytesformat=Queue Size: %.0f %s
patientreview.sizeformat=Queue Size: %.2f %s
patientreview.deletequeueconfirm=Do you really want to delete all selected patient/exam information in the Queue?
patientreview.layoutoptionstitle=Layout
patientreview.layoutoption=Single
patientreview.ftptransferinprogress=FTP Transfer in progress.  Try again later.

qsonix.title=QSONIX
qsonix.welcome=QSONIX provides a quick and easy way to begin a new exam. It guides you through the typical steps required to setup the system.
qsonix.header.applications=Applications
qsonix.header.animal=Animal
qsonix.header.patient=Patient
qsonix.header.presets=Presets
qsonix.header.transducers=Transducers
qsonix.button.more=More
qsonix.button.reuseactivepatient=Reuse Active Patient
qsonix.console.intro=Getting To Know\nYour System
qsonix.wizard.emedstep1=1 - Select Exam Type/Application
qsonix.wizard.emedstep2=2 - Select Transducer
qsonix.wizard.emedstep3=3 - Select Imaging Preset
qsonix.wizard.emedstep4=4 - Enter Patient Information
qsonix.wizard.reportingphyslabel=Attending Physician
qsonix.wizard.startexambutton=Start Exam
qsonix.wizard.welcomebutton=Welcome Page
qsonix.wizard.protocolbtn=Select Protocol...
qsonix.wizard.backbutton=< &Back
qsonix.wizard.nextbutton=&Next >
qsonix.wizard.finishbutton=Finish
qsonix.wizard.cancelbutton=Cancel
qsonix.wizard.selectedappmsg=You have selected the "%s" application.\n\n
qsonix.wizard.appnotsupportedmsg=The connected transducers do not support the "%s" Application.
qsonix.wizard.connectprobemsg=Please connect one of the following %s transducers:
qsonix.wizard.selecttransducermsg=Select a transducer to use with this application.
qsonix.wizard.convextransducermsg=%dmm Convex Transducer with range %d to %dMHz
qsonix.wizard.patransducermsg=%dmm Phased Array Transducer with range %d to %dMHz
qsonix.wizard.lineartransducermsg=%dmm Linear Transducer with range %d to %dMHz
qsonix.wizard.nopresetsmsg=The "%s" does not contain any visible Imaging Presets for the "%s" application.
qsonix.wizard.nopresetsmsg2=The Preset Setup page can be used to show hidden Imaging Presets.
qsonix.wizard.selectpresetmsg=You have selected the "%s" transducer and the "%s" application.
qsonix.wizard.selectpresetmsg2=Select an Imaging Preset from those listed below.
qsonix.wizard.remotesupportlabel=Remote Support
qsonix.wizard.wizard= Wizard
qsonix.wizard.eddmmddyyyy=EDD (mm/dd/yyyy)
qsonix.wizard.eddddmmyyyy=EDD (dd/mm/yyyy)
qsonix.wizard.eddyyyymmdd=EDD (yyyy/mm/dd)
qsonix.wizard.preclinical.animalinfo=Animal Information
qsonix.wizard.preclinical.animallabel=Animal ID
qsonix.wizard.preclinical.strain=Strain
qsonix.wizard.preclinical.investigator=Investigator

qsonix.patientdlg.futurelmptooltip=The start date occurs in the future
qsonix.patientdlg.lateeddtooltip=The EDD gives a GA that is greater than 45 weeks
qsonix.patientdlg.pasteddtooltip=The EDD occurs in the past
qsonix.patientdlg.questionabledatetooltip=Questionable Date

hibernatedlg.standby=Selecting Stand By allows the system to start quickly.  However, it is recommended that a complete system shutdown be performed periodically to ensure maximum system performance.
hibernatedlg.hibernate=Selecting Hibernate allows the system to start quickly.  However, it is recommended that a complete system shutdown be performed periodically to ensure maximum system performance.
hibernatedlg.standbycount=The system has been put into the Stand By state %d times since the last complete system shutdown.
hibernatedlg.hibernatecount=The system has been put into the Hibernation state %d times since the last complete system shutdown.
hibernatedlg.standbywarn=It is recommended that the system be completely shutdown after the system is put into the Stand By state %d times.
hibernatedlg.hibernatewarn=It is recommended that the system be completely shutdown after the system is put into the Hibernation state %d times.
hibernatedlg.standbybtn=Stand By
hibernatedlg.hibernatebtn=Hibernate

hotkeydlg.title=KEYPAD SETUP
hotkeydlg.column.key=Key
hotkeydlg.column.command=Command
hotkeydlg.sel.application=Application
hotkeydlg.sel.interface=Interface
hotkeydlg.sel.3d4d=3D/4D

researchdlg.title=RESEARCH SETUP

capturetabs.title=CAPTURE SETTINGS
capturetabs.list.fullscreen=Full Screen
capturetabs.list.image=Image
capturetabs.title.interval=Gated Capture
capturetabs.title.autolabel=Auto-Label
capturetabs.title.contrast=Capture Contrast

displaydlg.title=DISPLAY SETTINGS
displaydlg.full=Full
displaydlg.normal=Normal
displaydlg.left=Left
displaydlg.right=Right
displaydlg.all=All
displaydlg.subset=Subset

selectmanualdlg.title=DOCUMENTATION

adddocumentdlg.title=ADD DOCUMENTATION

rpstoragedlg.title=DATA STORAGE
rpstoragedlg.availabilitycolyes=yes
rpstoragedlg.availabilitycolno=no
rpstoragedlg.column.datatype=Data Type
rpstoragedlg.column.available=Available
rpstoragedlg.column.bitcount=Bit Count
rpstoragedlg.column.frames=Frames
rpstoragedlg.column.extension=Extension
rpstoragedlg.data.avi=Screen (AVI)
rpstoragedlg.data.bprescan=B: Pre Scan Converted
rpstoragedlg.data.bscan=B: Scan Converted
rpstoragedlg.data.rf=RF: Post-Beamformed
rpstoragedlg.data.mprescan=M: Pre Scan Converted
rpstoragedlg.data.mscan=M: Scan Converted
rpstoragedlg.data.rfcwpw=PW/CW RF
rpstoragedlg.data.pwspectrum=PW Spectrum
rpstoragedlg.data.colorrf=Color RF
rpstoragedlg.data.colorcombined=Color + B Image
rpstoragedlg.data.colorvv=Color Velocity/Variance
rpstoragedlg.data.contrast=Contrast
rpstoragedlg.data.elastocombined=Elasto + B Image
rpstoragedlg.data.elastooverlay=Elasto Overlay
rpstoragedlg.data.elastopre=Elasto Pre Scan Converted
rpstoragedlg.data.ecg=ECG
rpstoragedlg.data.gps1=GPS1
rpstoragedlg.data.gps2=GPS2

mmtsetupdlg.title=MEASUREMENTS
mmtsetupdlg.size.small=Small
mmtsetupdlg.size.medium=Medium
mmtsetupdlg.size.large=Large
mmtsetupdlg.usedefault=Use Default
mmtsetupdlg.warn.erasemmts=The Distance Unit has been changed from '%s' to '%s'. Applying this change will erase\nall of the current exam's measurements. Do you want to continue? 

obsettingsdlg.title=AUTHOR SETTINGS

mmtlayoutdlg.title=CUSTOMIZE MEASUREMENTS
mmtlayoutdlg.popmenu.newapp=Add Application
mmtlayoutdlg.popmenu.newpkg=Add Package
mmtlayoutdlg.popmenu.newmmt=Add Measurement
mmtlayoutdlg.popmenu.duplicate=Duplicate
mmtlayoutdlg.popmenu.delete=Delete
mmtlayoutdlg.popmenu.moveup=Move Up
mmtlayoutdlg.popmenu.movedown=Move Down
mmtlayoutdlg.errormsg.delFactoryDefaults=Factory defaults can not be deleted.
mmtlayoutdlg.ondelete=Are you sure you want to delete the selected item?
mmtlayoutdlg.btncaption.save2factory=Save to Factory Default
mmtlayoutdlg.tooltip.btnSave2Factory=If the dialog is closed with this box checked, the current custom measurements will be moved to the factory file.
mmtlayoutdlg.tooltip.btnUp=Move the selected measurement tool up one step.
mmtlayoutdlg.tooltip.btnDown=Move the selected measurement tool down one step.
mmtlayoutdlg.tooltip.btnAdd=Add sibling. The type of object to add varies depending on the currently selected tree item.
mmtlayoutdlg.tooltip.btnAddSubitem=Add subitem.
mmtlayoutdlg.tooltip.btnDelete=Delete the selected tree item.
mmtlayoutdlg.tooltip.treeMmts=Context menu and drag/drop are supported.
mmtlayoutdlg.copyof=Copy of 

mmteditorpageapp.title=Application
mmteditorpageapp.tooltip.editName=Factory applications are not modifiable.

mmteditorpagepkg.title=Package
mmteditorpagepkg.tooltip.editName=Factory package name is not modifiable.
mmteditorpagepkg.tooltip.listWorksheetModes=
mmteditorpagepkg.tooltip.listModes=
mmteditorpagepkg.tooltip.chkAutoSel=
mmteditorpagepkg.tooltip.chkShowHeading=

mmteditorpagemmt.title=Measurement
mmteditorpagemmt.tooltip.listType=Up to one type of measurement item is allowed.
mmteditorpagemmt.tooltip.listItem=
mmteditorpagemmt.tooltip.editName=
mmteditorpagemmt.tooltip.editID=
mmteditorpagemmt.tooltip.editCommonTitle=
mmteditorpagemmt.tooltip.chkCommonTitle=
mmteditorpagemmt.tooltip.comboAuto=
mmteditorpagemmt.tooltip.chkNewrow=
mmteditorpagemmt.automethod.none=None
mmteditorpagemmt.automethod.next=Next Measurement
mmteditorpagemmt.automethod.self=Repeat Measurement
mmteditorpagemmt.automethod.nextPlaceCaliper=Place Caliper for Next Mmt
mmteditorpagemmt.msg.cannotmodifymmt=The selected measurement cannot be modified.
mmteditorpagemmt.msg.overwritemmt=Are you sure you want to overwrite the current measurement?
mmteditorpagemmt.columntitle.name=Name
mmteditorpagemmt.columntitle.unit=Unit
mmteditorpagemmt.columntitle.precision=Precision
mmteditorpagemmt.columntitle.visibleinreport=Visible in\nReport
mmteditorpagemmt.columntitle.visibleinworksheet=Visible in\nWorksheet

mmtorderdlg.title=OB MEASUREMENT ORDER

fanfilterdlg.title=SYSTEM FILTER CLEANING REMINDER
fanfilterdlg.btntext.poweroff=Power off and clean now
fanfilterdlg.btntext.dismiss=Filter cleaning completed
fanfilterdlg.btntext.snooze=Remind me later
fanfilterdlg.guide=1. Power off and unplug the system.\n2. Remove the system filter (as shown).\n3. Vacuum thoroughly and reinstall.\n\nFor more detailed instructions, refer to the User Manual.

warrantyreminderdlg.title=WARRANTY REGISTRATION
warrantyreminderdlg.btntext.remindlater=Remind Me Later
warrantyreminderdlg.btntext.remindnever=Don't Remind Me Again
warrantyreminderdlg.guide=Thank you for purchasing a Sonix Series ultrasound system.\r\n\r\nTo protect your investment, ensure the warranty registration card included with your system has been completed and returned to Ultrasonix (using the envelope provided) or register online at www.ultrasonix.com/register.

claritylicensecheck.header=Licensing Reminder
claritylicensecheck.expiring=Your main system licenses will expire in %d days.\nPlease contact your Ultrasonix representative.
claritylicensecheck.expired=Your main system licenses have expired.\nPlease contact your Ultrasonix representative.

claritylicensecheckdlg.title=Imaging Improvements
claritylicensecheckdlg.btntext.addlicense=Accept
claritylicensecheckdlg.btntext.remindlater=Continue and Remind Me Later
claritylicensecheckdlg.guide1=This software update contains improvements to Image Processing that require a license. To obtain a free license update, contact Ultrasonix Technical Support and provide them with the following code:
claritylicensecheckdlg.guide2=Enter the license provided by Ultrasonix Technical Support and click "Accept" to activate the improvements.
claritylicensecheckdlg.supportinfo=Ultrasonix Technical Support \n\nwww.ultrasonix.com\nsupportservices@ultrasonix.com
claritylicensecheckdlg.licensenotvalid=License as entered is not valid. Please check the license and try again.
claritylicensecheckdlg.licenseadded=License has been added.

ecghrdlg.title=ECG HR PRECEDENCE
ecghrdlg.src0=ECG Realtime Spectrum
ecghrdlg.src1=Measured HR
ecghrdlg.src2=Input from Patient Dialog

licensedlg.title=LICENSING
licensedlg.column.option=Option
licensedlg.column.status=Status
licensedlg.column.expiry=Expiry
licensedlg.enabled=Enabled
licensedlg.disabled=Disabled
licensedlg.donglemissing=Dongle or Key Missing
licensedlg.licensingdisabled=Licensing System Disabled
licensedlg.expires=Expires in %d days
licensedlg.notavailable=Not Available
licensedlg.activates=Activates in %d days
licensedlg.expired=Expired
licensedlg.licensemask=Licence Files (*.key)|*.key|All Files (*.*)|*.*||
licensedlg.invalid=Invalid Licence file.
licensedlg.statusok=Licensing Status: OK
licensedlg.statusrollback=Licensing Status: Date rollback protection in effect.
licensedlg.statusnowarranty=Licensing Status: Software upgrade protection in effect.
licensedlg.demolicense=(DEMO)
licensedlg.devlicense=(DEV)
licensedlg.invalidlicense.short=The provided license is too short.  Please ensure that it has been correctly entered.
licensedlg.invalidlicense.invalid=The license is not valid.  Please ensure that it has been correctly entered.
licensedlg.invalidlicense.title=Invalid License
licensedlg.validlicense.title=Valid License
licensedlg.validlicense.msg=The license was successfully imported.

systemrestoredlg.title=SYSTEM RESTORE
systemrestoredlg.enable=You are about to enable System Restore.  The system must be restarted.  Do you want to continue?
systemrestoredlg.disable=You are about to disable System Restore.  The system must be restarted.  Do you want to continue?
systemrestoredlg.restore=You are about to restore the system to factory settings.  All changes on C: drive will be lost!  The system must be restarted.  Do you want to continue?
systemrestoredlg.commit=You are about to commit all disk changes to C: drive.  Factory settings will be modified!  The system must be rstarted.  Do you want to continue?

pictogramdlg.column.pictograms=Pictograms
probepreferencedlg.column.probes=Transducers

presetcopydlg.title=PRESET COPY

presetdeletedlg.title=PRESET DELETE

presetdlg.title=PRESETS SETUP
presetdlg.annotationstab.title=Annotations
presetdlg.pictogramstab.title=Pictograms
presetdlg.worksheetstab.title=Worksheets
presetdlg.measurementstab.title=Measurements
presetdlg.3d4dtab.title=3D/4D
presetdlg.imagingPresetstab.title=Imaging Presets
presetdlg.probeOrdertab.title=Transducer Order
presetdlg.renamepreset.title=Rename Preset
presetdlg.renamepreset.entername=Enter a Preset Name:
presetdlg.renamepreset.dup=The chosen Preset name already exists.  Try again?
presetdlg.ondelete=The %s preset will be deleted.\n\nDo you want to continue?
presetdlg.noprobes=No transducers are\nplugged into the system.
presetdlg.removeall=This will remove all custom presets, all custom preset assignments,\nand restore all factory assignments back to the original factory state.\n\nDo you want to continue?
presetdlg.overwrite=%s already has assignments, would you like to overwrite these existing assignments?

annotationsdlg.title=ANNOTATIONS

customkeydlg.programmable.title=CUSTOM KEYS
customkeydlg.common.ceptitle1=Print 1
customkeydlg.common.ceptitle2=Print 2
customkeydlg.common.ceptitle3=Print 3/Archive
customkeydlg.common.recordtime=(%d s or %d beats)
customkeydlg.common.actions.mmts=Measure
customkeydlg.common.actions.freeze=Freeze
customkeydlg.common.actions.archive=Exam Review
customkeydlg.common.actions.report=Report
customkeydlg.common.actions.captureprotocol=Gated Capture
customkeydlg.common.actions.qsonix=QSonix
customkeydlg.common.actions.reloadpreset=Reload Preset
customkeydlg.common.settings.localstore=Store Locally
customkeydlg.common.settings.dicomstore=DICOM Store
customkeydlg.common.settings.rfstore=RF Store
customkeydlg.common.settings.printer=Printer
customkeydlg.common.settings.videoout=Trigger (Photo Printer/VCR)
customkeydlg.common.settings.dicomprint=DICOM Print
customkeydlg.common.settings.cinerecord=Record Cine
customkeydlg.common.settings.progaction=Programmable Action
customkeydlg.common.settings.dicomcine=DICOM Store Cine
customkeydlg.common.settings.rfcine=RF Store Cine
customkeydlg.common.settings.virtualvcr=SonixDVR
customkeydlg.common.settings.rawdata=Record Raw Cine
customkeydlg.common.settings.recordtime=Record Cine
customkeydlg.common.actions.extra=Extra Action

printcapture.closing=Closing the Print Module.  Please wait...

peripheralsdlg.title=PERIPHERALS
peripheralsdlg.column.printer=Paper Printer
peripheralsdlg.column.display=LCD Display
peripheralsdlg.column.photo=VCR/Photo
peripheralsdlg.column.footswitch=Footswitch
peripheralsdlg.column.brightcontrast=Brightness/Contrast
peripheralsdlg.column.touchscreen=Touch Screen
peripheralsdlg.column.barcode=Barcode Reader

printcapturedlg.headertip=This text is placed at the top of the printed page.  The following special commands can be used and will be replaced as follows:\r    %%n - Patient Full Name\r    %%f - Patient First Name\r    %%l - Patient Last Name\r    %%m - Master ID\r    %%a - Accession ID\r    %%i - Institution Name\r    %%d - Date/Time\r    %%%% - %%

footswitchdlg.select.none=[None]
footswitchdlg.select.print=Print
footswitchdlg.select.freeze=Freeze
footswitchdlg.select.quickcine=Quick Cine Record
footswitchdlg.select.patient=Exam Management
footswitchdlg.select.measurements=Measurements
footswitchdlg.select.examreview=Exam Review
footswitchdlg.select.gpsmarker=GPS Marker
footswitchdlg.select.dvr=SonixDVR
footswitchdlg.select.cycleprobe=Next Transducer
footswitchdlg.select.probe.n=Transducer %d

barcodedlg.select.exampage=Exam Management Page
barcodedlg.select.newexam=New Exam

reportpage.select.dropdown=Drop Down List Template
reportpage.select.radio=Radio Button Template
reportpage.open=Select worksheet to open.
reportpage.delete=Are you sure you want to delete this template?

save3ddlg.title=SAVE PRESET
save3ddlg.invalid=Invalid Preset Name
save3ddlg.dup=This preset already exists.  Please\nchoose a different preset name.
save3ddlg.dup.dev=The preset name already exists, would like to overwrite the existing preset?
save3ddlg.badfile=The given preset name is invalid.  The name\ncannot contain the following characters:\n        \ / : * ? " < > |

savepresetdlg.title=SAVE PRESET
savepresetdlg.invalid=Invalid Preset Name
savepresetdlg.dup=This preset already exists.  Please\nchoose a different preset name.
savepresetdlg.dup.dev=The preset name already exists under this application,\ndo you want to overwrite the existing preset?
savepresetdlg.badfile=The given preset name is invalid.  The name\ncannot contain the following characters:\n        \ / : * ? " < > |

screendlg.title=SCREEN CONFIGURATION
screendlg.column.userinterface=User Interface
screendlg.column.systemmenu=System Menu
screendlg.column.hw1=HW Control 1
screendlg.column.displaycontrol=Display Control
screendlg.column.hw2=HW Control 2
screendlg.column.zones=Zones
screendlg.save.title=Save Screen Config
screendlg.save.label=Enter name:
screendlg.invalid=Invalid Selection (Remove Configuration)

menudlg.title=MENUS
menudlg.left=Left
menudlg.top=Top
menudlg.right=Right
menudlg.bottom=Bottom

statusdlg.title=STATUS BAR

activatedlg.title=Invalid License

systemdlg.title=SYSTEM SETTINGS
systemdlg.select.hibernate=Hibernate
systemdlg.select.standby=Standby
systemdlg.datechange=An exam is currently active.  Some exam information is dependent on the date and would become invalid if the date were changed.\n\nPlease end the current exam before adjusting the date.
systemdlg.setpassword.title=Set Password
systemdlg.setpassword.label=New Password:
systemdlg.verify.title=Verification
systemdlg.verify.label=Current Password:
systemdlg.badpassword=Incorrect Password
systemdlg.deleteall=All user settings will be deleted.\n\nDo you want to continue?
systemdlg.datewarning=The date/time applet is still open.  Please close it before exiting.
systemdlg.regionwarning=The regional settings applet is still open.  Please close it before exiting.
systemdlg.powermgtwarning=The Power Management applet is still open.  Please close it before exiting.
systemdlg.enterpassword.label=Enter Password

copyrightdlg.title=COPYRIGHT
copyrightdlg.libraries=This software uses the %s (%s), licensed under the %s.
copyrightdlg.copyright=The %s is Copyright (C) %s by %s.
copyrightdlg.copyright2=The %s is Copyright (C) %s by %s and Copyright (C) %s by %s.
copyrightdlg.copyright.file=See the license file for copyright details.
copyrightdlg.eigen=Eigen matrix library
copyrightdlg.qt=Qt framework
copyrightdlg.dcmtk=DCMTK library
copyrightdlg.exception=The %s also applies.
copyrightdlg.xerces=Xerces-C++ library
copyrightdlg.openssl=OpenSSL library
copyrightdlg.vpx=VP8 Codec SDK
copyrightdlg.source=Corresponding source code may be obtained by contacting Ultrasonix technical support.

aboutsystemdlg.examphraseversion=Software Version: %s (%s)\n
aboutsystemdlg.ecgphrasepart=ECG: %s\n
aboutsystemdlg.ecgmissing=Not Present
aboutsystemdlg.contextvisionclarityinstalled=Advanced Clarity: Installed\n
aboutsystemdlg.contextvisionclaritynotinstalled=Advanced Clarity: Not Installed\n
aboutsystemdlg.hwversion=Ultrasound Hardware Version: %d\n
aboutsystemdlg.supportedprobecode=Transducer Slot %d: %s (ID = %d)\n
aboutsystemdlg.unsupportedprobecode=Transducer Slot %d: ID = %d\n
aboutsystemdlg.notransducer=Transducer Slot %d: No transducer connected\n

modesetupdlg.title=IMAGING MODES

orderdlg.title=BUTTON ORDER
orderdlg.space=<Space>

importexportdlg.nostorage=No External Storage Detected
importexportdlg.selectexport=Select Items to Export
importexportdlg.export=EXPORT
importexportdlg.selectimport=Select Items to Import
importexportdlg.import=IMPORT
importexportdlg.column.item=Item
importexportdlg.row.imaging=Imaging Presets
importexportdlg.row.3d4d=3D/4D Presets
importexportdlg.row.worksheet=Worksheet Templates
importexportdlg.row.presetassignments=Preset Assignments
importexportdlg.row.settings=Settings
importexportdlg.row.licenses=Licenses
importexportdlg.row.logs=System Logs
importexportdlg.row.measurementorder=Measurement Order
importexportdlg.row.measurementcustom=Measurement Customization
importexportdlg.row.obtables=Obstetrical Tables
importexportdlg.storagefound=External Storage Detected (%s)
importexportdlg.nostoragefound=No External Storage Detected
importexportdlg.eraseexisting=The removable USB storage device contains previously exported files. Duplicate files will be erased.\n\nDo you want to continue?
importexportdlg.nosettings=No User Settings can be found on the removable storage device.
importexportdlg.exportsuccess=The selected User Settings have been successfully exported.
importexportdlg.importsuccess=The selected User Settings have been successfully imported.
importexportdlg.exportfailed=The selected User Settings were not exported successfully.
importexportdlg.importfailed=The selected User Settings were not imported successfully.
importexportdlg.row.protocols=Protocols
importexportdlg.row.ultrahub=SonixHUB Worksheets
importexportdlg.row.ultrahubprotocol=Protocol
importexportdlg.row.worksheets=Worksheets
importexportdlg.row.touchscreen=Touch Screen Customization
importexportdlg.row.protocolbanners=Banners
importexportdlg.row.dicomdevices=DICOM Server Configuration
importexportdlg.row.patientlists=Exam Management Field Lists
importexportdlg.row.gpsdata=SonixGPS Data
importexportdlg.row.stagenames=Labels

userdlg.title=USER SETTINGS
userdlg.examphraseversion=Version %s

admindlg.title=ADMINISTRATOR SETTINGS
admindlg.printkeys.customkeysname=Custom Keys
admindlg.service.title=Service Mode
admindlg.service.label=Enter Password:
admindlg.ddr.on=DDR is On
admindlg.ddr.off=DDR is Off

servicedlg.title=SERVICE
servicedlg.select.mode=Service/User Mode
servicedlg.select.research=Research Menus
servicedlg.select.shell=Shell Configuration
servicedlg.select.console=Console Report
servicedlg.select.patientbackup=Patient Data Backup/Restore
servicedlg.select.toggledynrngmultiplier=Toggle Dynamic Range Method
servicedlg.select.protocolSettings=Show/Hide Protocols
servicedlg.select.showlogwindow=Show Logging Window
servicedlg.select.resetfanfilterreminder=Reset Fan Filter Reminder
servicedlg.select.acoustic=Toggle Acoustic Testing Mode
servicedlg.select.screen=Screen Layout
servicedlg.select.calcs=Calcs Editor
servicedlg.select.focus.enable=ENABLE Adjust Focus Marker with Depth
servicedlg.select.focus.disable=DISABLE Adjust Focus Marker with Depth
servicedlg.select.battery=Battery Status
servicedlg.select.keypad=Keypad
servicedlg.select.touchscreen=Touch Screen
servicedlg.select.vgatouchscreen=VGA Touch Screen
servicedlg.select.explorer=Windows Explorer
servicedlg.select.registry=Registry Editor
servicedlg.select.keyboard=On-Screen Keyboard
servicedlg.select.prompt=Command Prompt
servicedlg.select.display=Display Settings
servicedlg.select.generatemmt=Generate Mmt Report
servicedlg.select.sysrestore=System Restore
servicedlg.select.examshare.enable=Enable Exam Sharing
servicedlg.select.examshare.disable=Disable Exam Sharing
servicedlg.reloadconsole=Console not active.  Would you like to try to reload the console?
servicedlg.setEnglish=Language must be set to English before opening this dialog.
servicedlg.select.camstudio=CamStudio

servicedlg.crashtype.normal=Normal
servicedlg.crashtype.withdatasegs=WithDataSegs
servicedlg.crashtype.withfullmemory=WithFullMemory
servicedlg.crashtype.withhandledata=WithHandleData
servicedlg.crashtype.filtermemory=FilterMemory
servicedlg.crashtype.scanmemory=ScanMemory
servicedlg.crashtype.withunloadedmodules=WithUnloadedModules
servicedlg.crashtype.withindirectlyreferencedmemory=WithIndirectlyReferencedMemory
servicedlg.crashtype.filtermodulepaths=FilterModulePaths
servicedlg.crashtype.withprocessthreaddata=WithProcessThreadData
servicedlg.crashtype.withprivatereadwritememory=WithPrivateReadWriteMemory
servicedlg.crashtype.withoutoptionaldata=WithoutOptionalData
servicedlg.crashtype.withfullmemoryinfo=WithFullMemoryInfo
servicedlg.crashtype.withthreadinfo=WithThreadInfo
servicedlg.crashtype.withcodesegs=WithCodeSegs
servicedlg.crashtype.withoutauxiliarystate=WithoutAuxiliaryState
servicedlg.crashtype.withfullauxiliarystate=WithFullAuxiliaryState
servicedlg.crashtype.withprivatewritecopymemory=WithPrivateWriteCopyMemory
servicedlg.crashtype.ignoreinaccessiblememory=IgnoreInaccessibleMemory
servicedlg.crashtype.withtokeninformation=WithTokenInformation

batterydlg.title=BATTERY STATUS
batterydlg.notfound=Battery not found
batterydlg.percentremain=Percent Charge Remaining
batterydlg.voltage=Current Voltage
batterydlg.onac=On A/C Power
batterydlg.onbattery=On Battery Power
batterydlg.age=Age
batterydlg.tmptemp=TMP Temperature
batterydlg.fgtemp=FG Temperature
batterydlg.rawdata=Raw Status Data

patientbackupdlg.title=PATIENT DATA BACKUP/RESTORE
patientbackupdlg.status.notfound=No External Storage Detected
patientbackupdlg.status.found=External Storage Detected (%s)
patientbackupdlg.warn.user=This command will replace any existing data on your system\n\nDo you want to continue?
patientbackupdlg.warn.dup=The system already has a PatientInfo folder. Continuing will remove existing data.\n\nDo you want to continue?
patientbackupdlg.warn.noimport=The removable USB storage device does not contain exported data. Nothing can be restored.
patientbackupdlg.warn.missingdatabase=The removable USB storage device does not contain an index database.\n\nDo you want to continue?
patientbackupdlg.warn.overwrite=Existing data on your system is about to be removed.\n\nDo you want to continue?
patientbackupdlg.warn.usbdup=The removable USB storage device contains previously exported data. Duplicate files will be erased.\n\nDo you want to continue?
patientbackupdlg.msg.backupcomplete=Backup complete.
patientbackupdlg.msg.restorecomplete=Data restore complete.
patientbackupdlg.msg.usbbackupcomplete=Data backup complete.

growthtable.title=OB Table Editor
growthtable.gtgendlg.deleteconfirmprompt=Are you sure you want to delete '%s'? 

trainingdlg.title=TRAINING TUTORIALS
trainingdlg.column.title=Title
trainingdlg.column.creator=Creator
trainingdlg.column.application=Application
trainingdlg.ondelete=Are you sure you want to delete the selected Training Tutorial?
trainingdlg.filters=Video Files|*.avi;*.mpg;*.mpeg;*.wmv|Audio Files|*.mp3;*.wma;*.wav|PowerPoint Presentations|*.ppt;*.pptx|Adobe Flash|*.swf||
trainingdlg.missinginfo=Missing Information
trainingdlg.missingtitle=A Title for the Training Tutorial has not been provided.
trainingdlg.missingtutorial=A Training Tutorial has not been specified for importing.
trainingdlg.dup=A Training Tutorial with the same storage name already exists.
trainingdlg.dupdownload=This Training Tutorial has already been downloaded.
trainingdlg.flashmessage=Adobe Flash files can only be opened in Tutorials panel.

operatorpage.column.operator=Operator ID
operatorpage.column.email=E-Mail Address
operatorpage.column.qa=Quality Assurance
operatorpage.qabtn=Quality Assurance

reviewerpage.column.reviewer=Reviewer ID
reviewerpage.column.email=E-Mail Address

mmtdlg.title=EMED MEASUREMENT
mmtdlg.incomplete=Incomplete Measurement
mmtdlg.missing.precision=A precision must be selected.
mmtdlg.missing.unit=A unit must be selected.
mmtdlg.missing.item=An item must be selected.
mmtdlg.missing.tool=A tool must be selected.
mmtdlg.missing.name=A name must be selected.

reportoverlay.cmd.nextpage=Next Page
reportoverlay.cmd.prevpage=Prev Page
reportoverlay.cmd.exit=Exit
reportoverlay.cmd.print=Print...
reportoverlay.cmd.savepdf=Save As PDF...
reportoverlay.cmd.printdefault=Print Default
reportoverlay.cmd.nextfetus=Next Fetus
reportoverlay.cmd.prevfetus=Prev Fetus
reportoverlay.cmd.normalview=Normal View
reportoverlay.cmd.detailedview=Detailed View
reportoverlay.ondeletemaster=Unable to delete master template.
reportoverlay.cmd.nextgraph=Next Graph
reportoverlay.cmd.prevgraph=Prev Graph
reportoverlay.cmd.ecghr=ECG HR
reportoverlay.cmd.measuredhr=Measured HR
reportoverlay.cmd.nexthr=Next HR
reportoverlay.cmd.prevhr=Previous HR

report.obgraphpage.control.mmtlist=OB Mmts List
report.obgraphpage.control.chart=OB Chart
report.comboboxfailed=ComboBox creation failed in CReportPageWnd::SetReadOnly()
report.missingfile=Cannot find file %s
report.missingparam=Exam path parameter is empty
report.selectallbutton=Select All
report.clearallbutton=Clear All
report.thumbnailslabel=Thumbnails

savetemplate.title.lock=LOCK WORKSHEET
savetemplate.title.save=SAVE TEMPLATE AS...
savetemplate.title.lockbutton=Lock Worksheet
savetemplate.title.discardbutton=Discard Worksheet Changes

savetemplate.missinginfo=Missing Information
savetemplate.missing.application=An Application must be selected.
savetemplate.missing.title=A Title must be provided.

reporting.formatdlg.title=PRINT FORMAT
reporting.formatdlg.newpagebutton=Start On New Page
reporting.obpage.print=Print
reporting.obpage.measurement=Measurement
reporting.obpage.author=Author
reporting.overlay.foundmsg=Found

console.nostatusreport=No status report available.
console.examphrasepluginnotactive=Console Driver Plug-in not active.

streamingdlg.title=SONIXLIVE SETUP

qareviewsetupdlg.title=QA REVIEW NETWORK SETUP

mmt.name.distancevolume=1 Dist. Volume
mmt.name.3distancevolume=3 Dist. Volume
mmt.name.acceleration=Acceleration
mmt.name.avgdistance=Average Distance
mmt.name.areared.ellipseellipse=Area Reduction (Ellipse/Ellipse)
mmt.name.areared.TraceTrace=Area Reduction (Trace/Trace)
mmt.name.areared.EllipseTrace=Area Reduction (Ellipse/Trace)
mmt.name.bdistance=B Distance
mmt.name.curvedistance=Curved Distance
mmt.name.bdiamred=B Diameter Reduction
mmt.name.ellipse.diam=Cross
mmt.name.ellipse=Ellipse
mmt.name.heartrate=Heart Rate
mmt.name.imtmmt.lower=Far
mmt.name.imtmmt.upper=Near
mmt.name.autotrace=Auto Trace
mmt.name.hipangle=Hip Angle
mmt.name.mdiamred=M Diameter Reduction
mmt.name.mdistance=M Distance
mmt.name.multilinedistance=Multiline Distance
mmt.name.2lineangle=Two Line Angle
mmt.name.3pointangle=Three Point Angle
mmt.name.spherevolume=Spherical Volume
mmt.name.ellipsevolume=Ellipsoidal Volume
mmt.name.rect=Rectangular Area
mmt.name.strainratio=Strain Ratio
mmt.name.vectorangle=Angle
mmt.warn.noitem=Cannot find item: %s
mmt.warn.noefwtag=Missing Default EFW tag: %s
mmt.warn.nocalc=Missing calculation tag: %s
mmt.warn.nocgatag=Missing Default CGA tag: %s
mmt.warn.missingvalues=INF: not enough values.
mmt.warn.badcount=INF: countRequired != 0
mmt.warn.badtag=Invalid measurement tag.
mmt.warn.nodefaultefw=INF: efw() defaultEFW is empty.
mmt.warn.invalidtable=CGA: Invalid table -- 
mmt.warn.missingparam=CGA: Missing parameter.
mmt.warn.emptyfilename=INF: cga() sFilename is empty.
mmt.warn.noobtables=INF: cga() OB Tables are unavailable.
mmt.warn.nodefaulttag=INF: cga() defaultTag is empty
mmt.warn.missingmmtid=Invalid tag: Missing measurement ID.
mmt.warn.missingsimpsonparam=Simpson's Bi-Plane: Missing parameter.
mmt.warn.biplaneover20=INF: simpBiPlane() greater than 20%%
mmt.warn.biplanemissingmmt=INF: SimpBiPlane() needed measurement is missing

mmt.name.pointbypoint=Point by Point
mmt.name.simpsonstrace=Simpson's Trace
mmt.name.spectrumrng=Spectrum Range
mmt.name.spectrumptbypt=Spectrum Point by Point
mmt.name.spectrumcontinual=Spectrum Continual
mmt.name.time=Time
mmt.name.timeslope=Time/Slope
mmt.name.continual=Continual
mmt.name.continual.line=Continual Line
mmt.name.velocity1=1 Cal. Velocity
mmt.name.velocity2=2 Cal. Velocity
mmt.name.velocitymean=Velocity Mean
mmt.name.follicle=Follicle Auto Trace
mmt.name.BCADAutoTrace=BCAD

dicom.dicomdir.applicationprofile.generalpurpose=STD-GEN-CD/DVD-RAM
dicom.dicomdir.applicationprofile.generalpurposedvd=STD-GEN-DVD-JPEG
dicom.dicomdir.applicationprofile.usbflash=STD-GEN-USB/MMC/CF/SD-JPEG
dicom.dicomdir.applicationprofile.usidsc=STD-US-ID/SC-SF/MF
    
dicom.sopclass.verification=Verification
dicom.sopclass.mpps=MPPS
dicom.sopclass.us=Ultrasound Image Storage (retired)
dicom.sopclass.usnew=Ultrasound Image Storage
dicom.sopclass.usmultiframe=Ultrasound Multi-frame Image Storage (retired) 
dicom.sopclass.usmultiframenew=Ultrasound Multi-frame Image Storage
dicom.sopclass.srcomprehensive=Comprehensive SR
dicom.sopclass.greyscaleprint=Basic Grayscale Print Management
dicom.sopclass.colorprint=Basic Color Print Management
dicom.sopclass.worklistfind=Modality Worklist - Find
dicom.sopclass.storcommitpush=Storage Commitment Push Model

dicom.imagepage.scriptfilter=VBScript (*.vbs)|*.vbs|JScript (*.js)|*.js|All Files (*.*)|*.*||
dicom.aepage.failedverification=The Verification Test failed for %s and gave the error code:\n
dicom.aepage.invalidae=AE information has not been provided.\nNo DICOM network will be used.
dicom.aepage.verification.result=The result of the verification is:\n\n%s
dicom.aepage.verification.accepted=: Accepted\n
dicom.aepage.verification.rejected=: Rejected\n
dicom.aepage.validation.toomanyon=The number of the enabled devices exceeds the maximum %d
dicom.aepage.validation.emptyhost=The IP address is required
dicom.aepage.validation.emptyaetitle=The AE title is required
dicom.aepage.validation.emptycommithost=The IP address for Storage Commitment is required
dicom.aepage.validation.emptycommittitle=The AE title for Storage Commitment is required
dicom.aepage.validation.portrange=The port number should be in the range of %d and %d
dicom.aepage.storeoption.ussr=Image and SR
dicom.aepage.storeoption.usonly=Image
dicom.aepage.storeoption.sronly=SR (Structured Report)
dicom.localhost.validation.emptystationname=The station name is required
dicom.verification.pingtimeout=%s: Ping request timed out.

dicom.imagepage.comp.nocompression=No Compression
dicom.imagepage.comp.jpeglossless=JPEG Lossless
dicom.imagepage.comp.jpeglossy=JPEG Lossy
dicom.imagepage.comp.jpeglossless.sv1=JPEG Lossless SV1
dicom.imagepage.comp.rle=RLE Lossless
dicom.imagepage.comp.asis=As Is
dicom.imagepage.strschedule.onidle=On Idle
dicom.imagepage.strschedule.now=Immediately
dicom.imagepage.strschedule.endstudy=End of Exam

dicom.settingsdlg.title=DICOM CONFIGURATION
dicom.imagepage.folderselect=Select a Storage Folder
dicom.contrastbrightpage.usagetip=Use the left and right keyboard keys for more accuracy.
dicom.storage.title=DICOM Storage Settings
dicom.print.title=DICOM Print Settings
dicom.worklist.title=DICOM Worklist Settings
dicom.storage.onclose=Closing the DICOM Storage Module.  Please wait...
dicom.worklist.onclose=Closing the DICOM Worklist Module.  Please wait...
dicom.print.onclose=Closing the DICOM Print Module.  Please wait...
dicom.zone.msg=DICOM Storage Module
dicom.searchdlg.dobformatddmmyy=DOB (dd/mm/yyyy)
dicom.searchdlg.searchlabel=Search
dicom.searchdlg.cancellabel=Cancel

zones.text.ga=GA:
zones.text.lmp=LMP:
zones.text.noecg=No ECG
zones.text.investigationuseonly=Investigational Use Only
zones.text.serviceRemoteCursorEnabled=Service mode: Remote Cursor enabled.

zones.ecg.cableerrormsg=Patient cable disconnected
zones.ecg.leaderrormsg=Lead Fault
zones.ecg.signalerrormsg=Signals not valid
zones.ecg.leadoffmsg=Lead Off
zones.ecg.leadreconmsg=Lead Reconnected
zones.ecg.pacemakermsg=Pacemaker detected
zones.ecg.hrtoohighmsg=HR too high
zones.ecg.arskmsg=Arrhythmia: SK
zones.ecg.ariregmsg=Arrhythmia: IRREG
zones.ecg.arasysmsg=Arrhythmia: ASYS

zones.printqueue.title=Print Module
zones.printqueue.initializeerror=Unable to initialize the Print Module
zones.printqueue.captureerror=Unable to add the screen capture to the print queue
zones.printqueue.printererror=Unable to send the queued images to the printer
zones.status.upswarning3=Low Battery\nPlug in AC power
zones.status.upswarning2=Low Battery\nPlug in AC power
zones.status.upswarning1=Shutting down in\n%i seconds
zones.focus.3dacquisitionmsg=Acquiring 3D. Press UPDATE to End Acquisition
zones.focus.3dacquisitionstartmsg=Press UPDATE to Begin Acquisition
zones.thumbnail.deletemsg=Press DEL to delete
zones.thumbnail.noimages=No images
zones.thumbnail.loading=Loading...
zones.thumbnail.empty=Empty
zones.thumbnail.loadingimages=Loading captured images...
zones.thumbnail.closemsg.mouse=Press SELECT to Close
zones.thumbnail.closemsg.touch=Touch Image to Close
zones.elasto.soft=Soft
zones.elasto.hard=Hard

zones.gps.marker=GPS Marker
zones.gps.historymarkers=Marker
zones.gps.finetune=Adjust
zones.gps.activesensor=Sensor Port
zones.gps.activeport=Sensor Port: %d
zones.gps.needletype=Needle Type: %s
zones.gps.noneedleselected=No Needle Selected
zones.gps.warndlg.title=GPS TRANSDUCER CALIBRATION
zones.gps.warndlg.message1=This GPS transducer must be calibrated manually.  Contact Ultrasonix Technical Support and provide them with the Sensor ID to obtain the relevant calibration instructions.
zones.gps.warndlg.message2=Warning: This GPS transducer cannot be used until it has been calibrated.
zones.gps.warndlg.supportinfo=Ultrasonix Technical Support \n\nwww.ultrasonix.com\ntech.support@ultrasonix.com
zones.gps.warndlg.warnmessage=The GPS transducer has been calibrated.  Verify that the calibration is correct by performing a SonixGPS Accuracy Test as described in the current SonixGPS User Manual.
zones.gps.confirm.reload=Do you want to load the recent biopsy markers?
zones.gps.confirm.applylastscheme=The organ registration scheme has been changed.\nThe prior one was:\n%s\nWhile the current one is:\n%s\n\nWould you like to apply the prior one so that the previous biopsy markers can be reloaded?

biopsydlg.title=BIOPSY GUIDE SETTINGS

touchscreensetupdlg.title=TOUCH SCREEN SETUP
touchscreenvgatab.title=TAB PROPERTIES
touchscreenvgaprops.title=CONTROL PROPERTIES
amuletcontrol.createerror=Window creation failed!
amuletcontrol.flashprompt=Flashing the Touch Screen.  Please wait...
amuletcontrol.calibrateprompt=Follow the instructions on the Touch Screen to calibrate it. This step is necessary before the system can continue.
amuletinterpretter.version=Version: 
amuletinterpretter.start=System Starting...
amuletinterpretter.stop=System Shutting down...
amuletinterpretter.appnotsupported=The %s transducer doesn't support the current application (%s).\nThe transducer can be selected using QSONIX.
amuletinterpretter.appnotsupportedtitle=Transducer Selection
touchscreen.panel.page=Page %d/%d
touchscreen.calibratemsg=Touch Screen Calibration in progress...
touchscreen.calibrateprompt=Tap Calibration Point %i
touchscreen.calibratepromptbegin=Tap the touch screen to begin calibration
touchscreen.calibratefailmsg=Calibration Failed
touchscreen.calibrateokmsg=Calibration Complete
touchscreen.3dPresets.tabtitle3d4d=3D/4D Presets
touchscreen.3dPresets.tabtitle3d=3D Presets
touchscreen.3dPresets.tabtitleimaginingmodes=Imaging Modes
touchscreen.3dPresets.tabtitlepresets=Presets
touchscreen.protocol.noprotocols=No protocols were found
touchscreen.savepreset=Save Preset...
touchscreen.tutorial.novideos=No Training Tutorials are available for the current Application
touchscreen.intro.tabtitle=Sonix starting...
touchscreen.intro.tabtitlesenosonix=SenoSONIX starting...
touchscreen.intro.versionlabel=Software Version: %s
touchscreen.message.loadlayouts=Loading new layouts.\nPlease wait...

touchscreen.measurements.tabtitleapp=Select Application
touchscreen.patient.tabtitleexammgt=Exam Management
touchscreen.tablabels.breastbiopsy=Breast Biopsy
touchscreen.buttonlabels.biopsyguide=Biopsy Guidelines
touchscreen.buttonlabelspatient.endexam=End Exam
touchscreen.buttonlabelspatient.cancel=Cancel
touchscreen.buttonlabelspatient.clear=Clear
touchscreen.buttonlabelspatient.worklist=Worklist
touchscreen.buttonlabelspatient.toggletabs=Toggle Tabs
touchscreen.buttonlabelspatient.ok=OK
touchscreen.buttonlabels.worksheet=Work Sheet
touchscreen.buttonlabels.report=Report
touchscreen.buttonlabels.triplex=Triplex
touchscreen.buttonlabels.traceonoff=Trace On/Off
touchscreen.buttonlabels.coloronoff=Color On/Off
touchscreen.buttonlabels.ecgonoff=ECG On/Off
touchscreen.buttonlabels.scanfan=Scan Type: FAN
touchscreen.buttonlabels.scansweep=Scan Type: SWEEP
touchscreen.buttonlabels.scanfanvalue=Value:\n %d %c
touchscreen.buttonlabels.scansweepvalue=Value:\n %d cm
touchscreen.buttonlabels.fovformat=FOV:\n %d %c
touchscreen.buttonlabels.qualityhigh=Quality:\n High
touchscreen.buttonlabels.qualitymed=Quality:\n Med
touchscreen.buttonlabels.qualitylow=Quality:\n Low
touchscreen.buttonlabels.qualityunknown=Quality:\n Unknown
touchscreen.buttonlabels.nextpage=Next...
touchscreen.buttonlabels.annotate.homepos=Home Position
touchscreen.buttonlabels.annotate.sethome=Set Home
touchscreen.buttonlabels.annotate.dellast=Delete Last
touchscreen.buttonlabels.annotate.prevpage=Prev Page
touchscreen.buttonlabels.annotate.nextpage=Next Page
touchscreen.buttonlabels.framebyframe=Frame by Frame
touchscreen.buttonlabels.start=Start
touchscreen.buttonlabels.end=End
touchscreen.buttonlabels.playspeed=Play Speed
touchscreen.buttonlabelsmmt.clearimage=Clear Image
touchscreen.buttonlabelsmmt.report=Report
touchscreen.buttonlabelsmmt.calcs=Calcs
touchscreen.buttonlabelsmmt.generic=Generic
touchscreen.buttonlabelsmmt.clearexam=Clear Exam
touchscreen.buttonlabelsmmt.selectapp=Select Application
touchscreen.buttonlabelsmmt.method=Method
touchscreen.buttonlabelsmmt.fetusformat=Fetus %c/%c
touchscreen.buttonlabelsmmt.nofetus=Fetus 0/0
touchscreen.buttonlabelsmmt.framebyframe=      Cine       Frm by Frm
touchscreen.buttonlabelsmmt.fastframebyframe=    Cine Fast    Frm by Frm
touchscreen.buttonlabelsmmt.back=Back...
touchscreen.buttonlabelspicto.rotate=Rotate
touchscreen.buttonlabelspicto.hide=Hide
touchscreen.buttonlabelspicto.next=Next Page
touchscreen.buttonlabelspicto.prev=Prev Page
touchscreen.buttonlabelspresets.savepreset=Save Preset...
touchscreen.buttonlabelsreport.hr=No HR
touchscreen.buttonlabelsreport.hrEcgShort=ECG HR
touchscreen.buttonlabelsreport.hrMeasuredShort=Mmt HR
touchscreen.buttonlabelsreport.hrPatientShort=Exam HR
touchscreen.buttonlabelsreport.biometrics=Biometrics
touchscreen.buttonlabelsreport.anatomy=Anatomy
touchscreen.buttonlabelsseonorx.superficial=Superficial
touchscreen.buttonlabelsseonorx.medium=Medium
touchscreen.buttonlabelsseonorx.deep=Deep
touchscreen.buttonlabelsseonorx.superficialdense=Superficial Dense
touchscreen.buttonlabelsseonorx.mediumdense=Medium Dense
touchscreen.buttonlabelsseonorx.deepdense=Deep Dense

touchscreen.buttonlabelsseonorx.focusspan=Focus Span
touchscreen.buttonlabelsseonorx.map=Map
touchscreen.buttonlabelsseonorx.focusnum=Focus #
touchscreen.buttonlabelsseonorx.dynrange=Dynamic Range

touchscreen.buttonlabelsreport.sendtopdf=Send To PDF...
touchscreen.buttonlabelsreport.print=Print...
touchscreen.buttonlabelsreport.printdefault=Print Default
touchscreen.buttonlabelsreport.exist=Exit
touchscreen.buttonlabelsreport.graph=Graph
touchscreen.buttonlabelsreport.finalreport=Final Report
touchscreen.buttonlabelsreport.worksheet=Worksheet
touchscreen.buttonlabelsreport.fetus=Fetus
touchscreen.buttonlabelsreport.pages=Pages

touchscreen.buttonlabel.3d.zoom=Zoom
touchscreen.buttonlabel.3d.background=Bkgnd
touchscreen.buttonlabel.3d.contrast=Cntrst
touchscreen.buttonlabel.3d.contrastpos=Cntrst Pos
touchscreen.buttonlabel.3d.space=Space
touchscreen.buttonlabel.3d.map=Map
touchscreen.buttonlabel.3d.axisx=X Axis
touchscreen.buttonlabel.3d.axisy=Y Axis
touchscreen.buttonlabel.3d.axisz=Z Axis
touchscreen.buttonlabel.3d.vrorient=VR Orient
touchscreen.buttonlabel.3d.threshold=Thresh

touchscreen.reporting.tabtitle=Reporting
touchscreen.setupdlg.selectlayoutprompt=Select a layout first.
touchscreen.setupdlg.controlexistsprompt=This control id already exist.
touchscreen.setupdlg.deletelayoutprompt=Are you sure you want to delete the layout?
touchscreen.setupdlg.changefailedprompt=Unable to modify custom layout
touchscreen.setupdlg.selectcontrolprompt=Select a control first.
touchscreen.setupdlg.selectgroupprompt=Select a group first.
touchscreen.setupdlg.deletecontrolprompt=Are you sure you want to delete the control?
touchscreen.setupdlg.deletgroupprompt=Are you sure you want to delete the group?
touchscreen.setupdlg.groupcreatefailprompt=Group creation failed.
touchscreen.setupdlg.commandtypeapp=App
touchscreen.setupdlg.commandtypezones=Zones
touchscreen.setupdlg.commandtypepatientreview=Patient Review
touchscreen.setupdlg.commandtypereportviewer=Report Viewer
touchscreen.setupdlg.commandtypelayouts=Layouts
touchscreen.setupdlg.commandtypevideo=Video Input
touchscreen.setupdlg.commandtype3d=3D
touchscreen.setupdlg.commandtypereportpage=Report Page
touchscreen.setupdlg.commandtypegraphpage=Graph Page
touchscreen.setupdlg.commandtypecommentpage=Comment Page
touchscreen.setupdlg.commandtypeanatomypage=Anatomy Page
touchscreen.setupdlg.commandtyppageup=Page Up
touchscreen.setupdlg.commandtypepagedown=Page Down
touchscreen.setupdlg.commandtypeprint=Print
touchscreen.setupdlg.commandtypefetustoggle=Show Fetus Toggle
touchscreen.setupdlg.commandtypegraphup=Graph Up
touchscreen.setupdlg.commandtypegraphdown=Graph Down
touchscreen.setupdlg.commandtypeclear=Clear
touchscreen.setupdlg.commandtypeclose=Close
touchscreen.setupdlg.title=COMMANDS
touchscreen.setupdlg.cmdtypenotapplicable=N/A
touchscreen.setupdlg.controlproperies.knob=Knob Button
touchscreen.setupdlg.controlproperies.action=Action Button
touchscreen.setupdlg.controlproperies.control=Control Button
touchscreen.setupdlg.controlproperies.white=White Button

touchscreen.senorx.probe=Transducer
touchscreen.senorx.wrongprobe=Current transducer is not a L14-5/38 transducer.  Select a L14-5/38 transducer before using Biopsy presets.
touchscreen.senorx.probenotavailable=Current transducer ID is not available.

langsetupdlg.title=LANGUAGE

internet.netsettingsdlg.title=NETWORK
internet.netsettingsdlg.configappletopen=The network configuration applet is still open.  Please close it before exiting.
internet.netsettingsdlg.emailsupport.title=SUPPORT
internet.netsettingsdlg.emailsupportarchive.title=E-MAIL ARCHIVE
internet.netsettingsdlg.wirelessconfigerrormsgtitle=Network Settings
internet.netsettingsdlg.wirelessconfigerrormsg=Unable to open the wireless configuration dialog dialog.\nEnsure that a wireless adapter is connected to the system.

internet.ipconfigdlg.title=IP CONFIGURATION

internet.rasdlg.title=MODEM
internet.rasdlg.dialing=Dialing...
internet.rasdlg.disconnecting=Disconnecting...
internet.rasdlg.openingportstatusmsg=Opening Port
internet.rasdlg.portopenstatusmsg=Port Opened
internet.rasdlg.devconnectstatusmsg=Connecting Device
internet.rasdlg.devconnectedstatusmsg=Device Connected
internet.rasdlg.alldevconnectedstatusmsg=All Devices Connected
internet.rasdlg.authenticatestatusmsg=Starting Authentication
internet.rasdlg.authenticatenotifystatusmsg=Authentication Notify
internet.rasdlg.authenticateretrystatusmsg=Authentication Retry
internet.rasdlg.callbackreqstatusmsg=Callback Requested
internet.rasdlg.changepassreqstatusmsg=Change Password Requested
internet.rasdlg.prophasestatusmsg=Projection Phase Started
internet.rasdlg.speedcalcstatusmsg=Link Speed Calculation
internet.rasdlg.authenticateackstatusmsg=Authentication Acknowledged
internet.rasdlg.reauthenticatestatusmsg=Reauthenticatation Started
internet.rasdlg.authenticatedstatusmsg=Authenticated
internet.rasdlg.preparecallbackstatusmsg=Preparation For Callback
internet.rasdlg.waitforresetstatusmsg=Waiting For Modem Reset
internet.rasdlg.waitforcallbackstatusmsg=Waiting For Callback
internet.rasdlg.interactivestatusmsg=Interactive
internet.rasdlg.retryauthenticatestatusmsg=Retry Authentication
internet.rasdlg.callbacksetstatusmsg=Callback Set By Caller
internet.rasdlg.passexpiredstatusmsg=Password Expired
internet.rasdlg.connectedstatusmsg=Connected
internet.rasdlg.disconnectedstatusmsg=Disconnected
internet.rasdlg.unknownerrorstatusmsg=Undefined Error Code
internet.rasdlg.disconnectstatusmsg=Disconnect
internet.rasdlg.connectstatusmsg=Connect
internet.rasdlg.dialerror=Undefined RAS Dial Error (%ld).

internet.netsettingsdlg.updatedlg.title=SOFTWARE UPDATE
internet.netsettingsdlg.updatedlg.copyupdate=ERROR: Unable to copy the update from the removeable device.
internet.netsettingsdlg.updatedlg.errordownload=ERROR: Unable to download the update package.
internet.netsettingsdlg.updatedlg.nonetwork=No Network Available
internet.netsettingsdlg.updatedlg.phraseversion=Version %s
internet.netsettingsdlg.updatedlg.phrasedownload=Downloading %s...
internet.netsettingsdlg.updatedlg.phraseready=Ready
internet.netsettingsdlg.updatedlg.phrasenoupdates=No updates are available.
internet.netsettingsdlg.updatedlg.phraseretrieve=Retrieving the list of available updates...
internet.netsettingsdlg.updatedlg.phraseapplyupdate=Applying update...
internet.netsettingsdlg.updatedlg.location.internet=Internet Update
internet.netsettingsdlg.updatedlg.location.internet2=Internet Driver Update
internet.netsettingsdlg.updatedlg.nosourcesfound=No update sources found
internet.netsettingsdlg.passworderror=Incorrect Password
internet.netsettingsdlg.columntitle.connection=Connection Name
internet.netsettingsdlg.columntitle.ip=IP Address
internet.netsettingsdlg.columntitle.adapter=Network Adapter
internet.netsettingsdlg.columntitle.isenabled=Enable

internet.socketserror=Windows sockets initialization failed.

internet.emailsupportdlg.addressnotsetmsg=Status: E-Mail address not set
internet.emailsupportdlg.namenotsetmsg=Status: E-Mail Name not set!
internet.emailsupportdlg.servernotsetmsg=Status: SMTP Server not set!
internet.emailsupportdlg.portnotsetmsg=Status: SMTP Port not set!
internet.emailsupportdlg.msgreadymsg=The message is ready to be sent with the following attachment: 
internet.emailsupportdlg.from=From: 
internet.emailsupportdlg.connectingmsg=Status: Connecting to SMTP...
internet.emailsupportdlg.connectedmsg=Status: Connected
internet.emailsupportdlg.sendmsg=Status: Sending message...
internet.emailsupportdlg.sendfailmsg=Status: Could not send message.
internet.emailsupportdlg.msgsentdmsg=Status: Message sent.
internet.emailsupportdlg.connectfailmsg=Status: Could not connect.
internet.emailsupportdlg.namelabel=Name: %s\n
internet.emailsupportdlg.hospitallabel=Hospital: %s\n
internet.emailsupportdlg.citylabel=City: %s\n
internet.emailsupportdlg.countrylabel=Country: %s\n

internet.ftp.notresolved=The server name could not be resolved.
internet.ftp.incorrectusername=The request to connect and log on to an FTP server could not be completed because the supplied user name is incorrect.
internet.ftp.incorrectpassword=The request to connect and log on to an FTP server could not be completed because the supplied password is incorrect.
internet.ftp.loginfailure=The request to connect and log on to an FTP server failed.
internet.ftp.cannotconnect=The attempt to connect to the server failed.
internet.ftp.timeout=The request has timed out.
internet.ftp.nopassivemode=Passive mode is not available on the server.
internet.ftp.dropped=The FTP operation was not completed because the session was aborted.
internet.ftp.transferinprogress=The requested operation cannot be made on the FTP session handle because an operation is already in progress.
internet.ftp.invalid=Invalid parameter entered.
internet.ftp.unknown=Unknown error.

keygen.keygendlg.selectlicense=Please select at least one license to export

mlsetup.translatedlg.selectlanguagemsg=Please select a language first
mlsetup.translatedlg.loaderror=Unable to load library: %s.  The controls of this library will not be loaded.


panoramic.tableerror=Error in GetTableAddress(): Retrieved wrong table.
panoramic.loadmsg=Loading Panoramic Tables...
panoramic.imagematchmsg=Matching Images...
panoramic.buildingimagemsg=Building Panoramic Image...

measurements.deleteallprompt=This will delete all measurements in the exam.\nDo you want to continue?

utilscontrols.capturevideo.nowebcamprompt=Webcam(USB) is not detected!
utilscontrols.capturevideo.coinitfailmsg=CoInitialize Failed!\r\n
utilscontrols.capturevideo.nocapturedeviceprompt=No video capture device was detected.
utilscontrols.colourpicker.autolabel=Automatic
utilscontrols.colourpicker.morelabel=More Colours...

utilscontrols.asmedit.daterangeprompt=Please specify a date between %s and %s.

utilscontrols.serial.notsupportedprompt=Overlapped I/O and time-outs are not supported, when overlapped I/O is disabled.
utilscontrols.serial.notsupportedtimeoutsprompt=Timeouts are not supported, when SERIAL_NO_CANCELIO is defined.
utilscontrols.serial.notsupportedprompttitle=Serial library

utilscontrols.burn.startburnmsg=Starting burn process...
utilscontrols.burn.connectingmsg=Connecting to device...
utilscontrols.burn.treecreatemsg=Creating Joliet tree...
utilscontrols.burn.testdevicemsg=Testing device...
utilscontrols.burn.nomediamsg=The dvd drive contains no CD-R(W)/DVD+-R(W) media.  Insert blank writeable CD or DVD before burning.
utilscontrols.burn.nomediamsgtitle=Patient Archival
utilscontrols.burn.enablebufferunderrunmsg=Enabling Buffer Underrun Protection...
utilscontrols.burn.setmaxspeedmsg=Setting maximum supported speed...
utilscontrols.burn.getdiscinfomsg=Getting disc information...
utilscontrols.burn.archivetomsg=Archiving to 
utilscontrols.burn.readonlymsg=This %s is read-only.  Please insert rewritable media.
utilscontrols.burn.importtrackmsg=Importing Joliet track...
utilscontrols.burn.addfilesmsg=Adding files to Joliet tree...
utilscontrols.burn.addfilesjpgmsg=Adding files to Joliet tree (converting images to JPG)...
utilscontrols.burn.addfilesmsggif=Adding files to Joliet tree (converting images to GIF)...
utilscontrols.burn.addfilesmsgbmp=Adding files to Joliet tree (converting images to BMP)...
utilscontrols.burn.erasemsg=Erasing %s media...
utilscontrols.burn.erasedonemsg=Erase Complete
utilscontrols.burn.freespaceerrormsg=This %s does not have enough free space.\n\n%s free space %dMB\nPatient data size %dMB
utilscontrols.burn.removablefreespaceerrormsg=%s does not have enough free space.\n\n%s free space %dMB\nPatient data size %dMB
utilscontrols.burn.archivetospacemsg=Archiving to %s with %dMB of free space...
utilscontrols.burn.buildisomsg=Building ISO image...
utilscontrols.burn.progress1msg=Burn in progress...
utilscontrols.burn.progress2msg=%dMB of data is being stored
utilscontrols.burn.progressTransfer=Transfer in progress...
utilscontrols.burn.finalizemsg=Finalizing burning process...
utilscontrols.burn.ejectmsg=Ejecting disc...
utilscontrols.burn.cleanupmsg=Cleaning up...
utilscontrols.burn.donemsg=Burn process is complete.
utilscontrols.burn.donefailmsg=Burn process failed.
utilscontrols.burn.disctypeunknown=Unknown
utilscontrols.burn.disctypecd=CD-ROM
utilscontrols.burn.disctypecdr=CD-R
utilscontrols.burn.disctypecdrw=CD-RW
utilscontrols.burn.disctypedvd=DVD-ROM
utilscontrols.burn.disctypedvdr=DVD-R
utilscontrols.burn.disctypedvdram=DVD-RAM
utilscontrols.burn.disctypedvdrwro=DVD-RW RO (Restricted Overwrite)
utilscontrols.burn.disctypedvdrwsr=DVD-RW SR (Sequential Recording)
utilscontrols.burn.disctypedvdsrw=DVD+RW
utilscontrols.burn.disctypecddd=DD (Double Density) CD-ROM
utilscontrols.burn.disctypecdddr=DD (Double Density) CD-R
utilscontrols.burn.disctypedvdpr=DVD+R
utilscontrols.burn.notemptymsg=This %s disc is not empty.\n\n\n\nPress YES to erase the disc.\n\nPress NO to continue archive process (multisession).\n\nPress CANCEL to cancel archive process.\n\n\nWARNING!! Disc erase will destroy all data on the disc!!
utilscontrols.burn.closedmsg=This %s disc is closed.  It has to be erased first in order to write data to it.\n\n\n\nPress YES to erase the disc.\n\nPress NO to cancel archive process.\n\n\nWARNING!! Disc erase will destroy all data on the disc!!
utilscontrols.burn.canceldmsg=Archiving Operation is being cancelled...
utilscontrols.burn.progresspreparetitle=Preparing items...
utilscontrols.burn.progresspreparemsg=Preparing selected items for archival...

utilscontrols.vcrpage.connectedmsg=Connected...
utilscontrols.vcrpage.connectfailmsg=Cannot connect.
utilscontrols.vcrpage.detectedmsg=Detected: 
utilscontrols.vcrpage.notdetectedmsg=VCR not found.
utilscontrols.vcrpage.modeunknownmsg=Unknown video mode
utilscontrols.vcrpage.recorderpalmsg=Recorder - PAL
utilscontrols.vcrpage.recorderntscmsg=Recorder - NTSC
utilscontrols.vcrpage.playerpalmsg=Player - PAL
utilscontrols.vcrpage.playerntscmsg=Player - NTSC
utilscontrols.vcrpage.medrecorderpalmsg=Medical Recorder - PAL
utilscontrols.vcrpage.medrecorderntscmsg=Medical Recorder - NTSC
utilscontrols.vcrpage.medplayerpalmsg=Medical Player - PAL
utilscontrols.vcrpage.medplayerntscmsg=Medical Player - NTSC
utilscontrols.vcrpage.unkowndevicemsg=Unknown Device.

utilscontrols.videoinput.portnotsetupmsg=VCR port is not setup.
utilscontrols.videoinput.freezecmd=Freeze
utilscontrols.videoinput.playcmd=Play
utilscontrols.videoinput.stopcmd=Stop
utilscontrols.videoinput.pausecmd=Pause
utilscontrols.videoinput.rewindcmd=Rewind
utilscontrols.videoinput.ffcmd=Fast Forward
utilscontrols.videoinput.playrevcmd=Play Reverse
utilscontrols.videoinput.recordcmd=Record
utilscontrols.videoinput.recpausecmd=Record Pause
utilscontrols.videoinput.ejectcmd=Eject
utilscontrols.videoinput.playforinccmd=Speeds up playback forward
utilscontrols.videoinput.playrevinccmd=Speeds up playback reverse
utilscontrols.videoinput.rectogglecmd=Record toggle
utilscontrols.videoinput.statuspause=Pause
utilscontrols.videoinput.statusrecord=Recording...
utilscontrols.videoinput.statusplay=Play
utilscontrols.videoinput.statusejected=Tape Ejected
utilscontrols.videoinput.statusstop=Stop
utilscontrols.videoinput.statusrewind=Rewind...
utilscontrols.videoinput.statusfastfor=Fast Forward...
utilscontrols.videoinput.statusejecting=Tape Ejecting...
utilscontrols.videoinput.statusforward=Forward 
utilscontrols.videoinput.statusreverse=Reverse 
utilscontrols.videoinput.createfailmsg=VideoInputWnd creation failed.
utilscontrols.videoinput.connectfailmsg=Unable to connect to VCR.
utilscontrols.videoinput.portfailmsg=VCR port is not setup.
utilscontrols.videoinput.still=Still

utilscontrols.videoinput.sysenumfailmsg=Couldn't create system enumerator!  hr=0x%x
utilscontrols.videoinput.classenumfailmsg=Couldn't create class enumerator!  hr=0x%x
utilscontrols.videoinput.bindmonokerfailmsg=Couldn't bind moniker to filter object!  hr=0x%x
utilscontrols.videoinput.videointerfacefailmsg=Failed to get video interfaces!  hr=0x%x
utilscontrols.videoinput.filtergraphfailmsg=Failed to set capture filter graph!  hr=0x%x
utilscontrols.videoinput.addcapturefilterfailmsg=Couldn't add the capture filter to the graph!  hr=0x%x\r\n\r\nIf you have a working video capture device, please make sure\r\nthat it is connected and is not being used by another application.\r\n\r\n
utilscontrols.videoinput.capturerenderfailmsg=Couldn't render the video capture stream.  hr=0x%x\r\nThe capture device may already be in use by another application.\r\n\r\nThe sample will now close.
utilscontrols.videoinput.windowinitfailmsg=Couldn't initialize video window!  hr=0x%x
utilscontrols.videoinput.filtergraphregisterfailmsg=Failed to register filter graph with ROT!  hr=0x%x
utilscontrols.videoinput.rungraphfailmsg=Couldn't run the graph!  hr=0x%x
utilscontrols.videoinput.monikernamefailmsg=Couldn't get moniker's display name!  hr=0x%x
utilscontrols.videoinput.bindcontextfailmsg=Couldn't create a bind context for moniker!  hr=0x%x
utilscontrols.videoinput.filteraddfailmsg=Failed in AddSourceFilterForMoniker()!  hr=0x%x
utilscontrols.videoinput.capturerendershortfailmsg=Couldn't render capture stream.  The device may already be in use.\r\n\r\nhr=0x%x
utilscontrols.videoinput.abortmsg=Received an error event: 0x%x.  Closing app.\0

utilsstatics.mdump.savefailmsg=Failed to save dump file to '%s' (error %d)
utilsstatics.mdump.createfailmsg=Failed to create dump file '%s' (error %d)
utilsstatics.mdump.dllinvalidmsg=DBGHELP.DLL too old
utilsstatics.mdump.dllmissingmsg=DBGHELP.DLL not found


modevariables.loadusersetuperrmsg=The user preset, %s, is invalid or is not compatible with this software version.\nThe following error message was returned during validation:\n\t%s\n\nAn attempt to load the corresponding factory preset will be made.\n
modevariables.loadsetuperrtitle=Invalid Preset
modevariables.loadmastersetuperrmsg=The master preset, %s, is invalid or is not compatible with this software version.\nThe following error message was returned during validation:\n\t%s
modevariables.loadmastersetup1errmsg=The master preset, %s, is invalid or is not compatible with this software version.\nThe following error message was returned during validation:\n\t%s\n\n
variables.settings.validpresetmsg=Preset is valid.
variables.settings.invalidpresetmsg=The preset file is invalid.
variables.settings.missingpresetmsg=Could not find specified preset file.
variables.settings.missingvariablesfilemsg=Could not find a variables listing file.  variables.lst.xml must be located in the same folder as the preset.
variables.settings.presetmissingprobemsg=Transducer not valid for this preset (ID=%d)
variables.settings.missingprobemsg=Transducer not found in transducer listing (ID=%d).
variables.settings.parseerrormsg=Error in parsing variables - cannot retrieve id.
variables.settings.parammissingmsg=Parameter not found in variables listing (ID=%d).
variables.settings.usermasterpreset=The user preset has the master flag set.  Please delete and recreate the preset.

crashreport.selectfilemsg=Please select a file to send, or enter  \r\na message describing the problem.
crashreport.senderrormsg=The error report could not be sent.  Ensure that your network settings have been correctly configured.\r\n\r\nPlease export the system log files and send the file\r\n    '%s'\r\nto %s.
crashreport.outofmemoryerrormsg=The operating system is out\nof memory or resources.
crashreport.pathnotfounderrormsg=The specified path was not found.
crashreport.filentofounderrormsg=The specified file was not found.
crashreport.invalidexeerrormsg=The .EXE file is invalid\n(non-Win32 .EXE or error in .EXE image).
crashreport.accessdeniederrormsg=The operating system denied\naccess to the specified file.
crashreport.invalidassociationerrormsg=The filename association is\nincomplete or invalid.
crashreport.ddecollisionerrormsg=The DDE transaction could not\nbe completed because other DDE transactions\nwere being processed.
crashreport.ddeerrormsg=The DDE transaction failed.
crashreport.ddetimouterrormsg=The DDE transaction could not\nbe completed because the request timed out.
crashreport.dllnotfounderrormsg=The specified dynamic-link library was not found.
crashreport.noassociationerrormsg=There is no application associated\nwith the given filename extension.
crashreport.lackmemoryerrormsg=There was not enough memory to complete the operation.
crashreport.sharingviolationerrormsg=sharing violation occurred.
crashreport.unknownerrormsg=Unknown Error (%d) occurred.
crashreport.email.dllloaderrormsg=Failed to load MAPI32.DLL.
crashreport.email.dllinvaliderrormsg=Invalid MAPI32.DLL, cannot find MAPISendMail.

presetpage.nodefaultpreset=None

touchscreen.panel.probes.unplugged=Unplugged

touchscreen.panel.qsonix.previousbtn=Prev
touchscreen.panel.qsonix.nextbtn=Next

zone.abus.deg=Degrees
zone.abus.currentpos=Current Pos
zone.abus.fpv=FPV

zone.cinescroll.endslow=Cine End
zone.cinescroll.endfast=End Fast
zone.cinescroll.startslow=Cine Start
zone.cinescroll.startfast=Start Fast
zone.cinescroll.currentslow=Cine Frame
zone.cinescroll.currentfast=Frame Fast
zone.cinescroll.playcine=Play Cine
zone.cinescroll.stopcine=Stop Cine

zone.dopplercontrol.baselined=BaselineD
zone.dopplercontrol.baselinec=BaselineC
zone.dopplercontrol.priority=Priority

zone.focus.steer=Steer
zone.focus.zoom=Zoom
zone.focus.rotate=Rotate
zone.focus.offsetx=Left/ Right
zone.focus.offsety=Up/ Down
zone.focus.focuscount=Focus #
zone.focus.focusdepth=Focus
zone.focus.focusspan=Focus Span

zone.annotation.capturepos=Capture Pos

zone.graymap.gamma=Gamma
zone.graymap.brightness=Brightness
zone.graymap.contrast=Contrast
zone.graymap.center=Center

zone.colormap.variance=Velocity Variance
zone.colormap.directional=Directional Power

zone.vecscale.degree=degree

zone.gpswarning.start.msg=Follow these images to perform a SonixGPS system accuracy test.
zone.gpswarning.msg.inplane.title=SonixGPS In-Plane Tip:
zone.gpswarning.msg.inplane.msg1=1) Adjust to match sample in-plane image.
zone.gpswarning.msg.inplane.msg2=2) Enter tissue while staying in-plane.
zone.gpswarning.msg.outplane.title=SonixGPS Out-of-Plane Tip:
zone.gpswarning.msg.outplane.msg1=1) Hold transducer stationary, aim cross at top of target.
zone.gpswarning.msg.outplane.msg2=2) Enter tissue.
zone.gpswarning.msg.performancebox.title=SonixGPS Tip:
zone.gpswarning.msg.performancebox.msg1=Keep transducer and needle within working field.
zone.gpswarning.title=SonixGPS Caution:
zone.gpswarning.msg.fiducial.qualitylow=The signal quality of the transducer or fiducial sensors is low.\nKeep them within working field.

protocolsDlg.title=PROTOCOL SETTINGS

sonixgpsdlg.title=SonixGPS SETTINGS
sonixgps.button=SonixGPS
sonixgps.probenotsupported=%s probe is not supported by SonixGPS.
sonixgps.probenotsupported2=This probe is not supported by SonixGPS.
sonixgps.probecalifailed=Loading probe calibration file failed. Check log.
sonixgps.needlenotspecified=SonixGPS needle type is not specified.
sonixgps.needlefilemissing=SonixGPS needle calibration file is missing. Check log.
sonixgps.needlefileloadfailed=Loading needle calibration file failed. Check log.
sonixgps.init=Starting SonixGPS...
sonixgps.warning=Turning on SonixGPS will cause the system to emit a magnetic field which may interfere with pacemakers.  Please refer to the User Manual for further details.  Do you really want to turn on SonixGPS?
sonixgps.sensorunplugged=Sensor Unplugged
sonixgpsdlg.probe.linear=Linear
sonixgpsdlg.probe.convex=Convex
sonixgpsdlg.probe.endo=Endo
sonixgpsdlg.sensor.needle09mm=0.9 mm
sonixgpsdlg.sensor.needle05mm=0.5 mm
sonixgpsdlg.sensor.bracket=Bracket
sonixgpsdlg.sensor.etrax=eTRAX
sonixgpsdlg.sensor.fiducial=Fiducial
sonixgpsdlg.tracking.title=GPS 3D Map Settings

rpserver.msg.connections=%s: Connections - %s
rpserver.msg.noconnections=%s: No Connections

console.tutorial.keyname.patient=EXAM MGMT Button
console.tutorial.keytext.patient=Provides access to the Exam Management page.
console.tutorial.keyname.probe=TRANSDUCER Button
console.tutorial.keytext.probe=Provides access to transducer selection keys on touch screen.
console.tutorial.keyname.menu=MENU Button
console.tutorial.keytext.menu=Provides access to setup menus.
console.tutorial.keyname.pictogram=PICTOGRAM Button
console.tutorial.keytext.pictogram=Turns on/off application-specific Pictogram graphics. Tap Pictogram and dial through the various icons.\n\n- trackball positions orientation marker\n- touch screen Rotate dial pivots orientation marker.
console.tutorial.keyname.arrow=ARROW Button
console.tutorial.keytext.arrow=Turns on/off Arrow graphic on the image field. Trackball positions and rotates the Arrow graphic.
console.tutorial.keyname.qsonix=QSONIX Button
console.tutorial.keytext.qsonix=Provides:\n\n- Quick exam start-up\n- Sonix Operator Console Tutorial\n- Online Support access.
console.tutorial.keyname.text=TEXT Button
console.tutorial.keytext.text=Activates the keyboard for Text entry and displays Application-specific Annotation buttons on the touch screen.
console.tutorial.keyname.deltext=DELETE (Text) Button
console.tutorial.keytext.deltext=Deletes the most recent Text or Annotation entry. Provides "delete character" functionality during data entry mode (Exam Management page).
console.tutorial.keyname.trackball=Trackball
console.tutorial.keytext.trackball=Used to position the onscreen arrow graphic, flashing text cursor, arrow cursor, calipers, etc.
console.tutorial.keyname.measure=MEASURE Button
console.tutorial.keytext.measure=Initiates/closes the Measurement/Calculation Package. Removes measurements from frozen image field.\n\nNote: Application-specific measurement tabs are available on the touch screen.
console.tutorial.keyname.delmeasure=DELETE (Measurement) Button
console.tutorial.keytext.delmeasure=In Measure mode, deletes most recently saved measurement. Deletes selected thumbnail image.
console.tutorial.keyname.select=SELECT Button
console.tutorial.keytext.select=Provides a wide variety of functions depending on the imaging state (e.g., selects/sets measurements, selects onscreen menu items, etc.) as well as "Left Click" mouse button functionality.
console.tutorial.keyname.update=UPDATE Button
console.tutorial.keytext.update=Provides a wide variety of functions depending on the imaging state (e.g., toggle between image fields on Dual/Quad image, toggle between 2D and Doppler Trace image fields, toggles the active caliper, etc) as well as  "Right Click" mouse button functionality.
console.tutorial.keyname.freeze=FREEZE Button
console.tutorial.keytext.freeze=Pause/resume a live image.
console.tutorial.keyname.print1=1 Button (Custom Key 1)
console.tutorial.keytext.print1=One of three (3) programmable buttons (8.2.12) used to:\n\n- auto-store/print images or CINE loops to a configured printer, archive, etc.\n- access certain functions such as Exam Review and Measurement Packages.
console.tutorial.keyname.print2=2 Button (Custom Key 2)
console.tutorial.keytext.print2=One of three (3) programmable buttons (8.2.12) used to:\n\n- auto-store/print images or CINE loops to a configured printer, archive, etc.\n-  access certain functions such as Exam Review and Measurement Packages.
console.tutorial.keyname.print3=ARCHIVE Button (Custom Key 3)
console.tutorial.keytext.print3=Third of three (3) programmable buttons used to:\n\n- auto-store/print images or CINE loops to a configured printer, archive, etc.\n- set to provide access to the Exam Management/Image Review system.

console.tutorial.keyname.bmode=B-MODE/2D Button/Dial
console.tutorial.keytext.bmode=Activates (press dial) 2D/B-Mode imaging mode and controls 2D Gain (turn dial) and M-Mode Gain.
console.tutorial.keyname.dual=DUAL/QUAD Button
console.tutorial.keytext.dual=Activates Dual (press once) and Quad (press twice) split screen imaging. UPDATE button toggles between image fields. Press B-MODE to return to single screen imaging.
console.tutorial.keyname.mmode=M-MODE Button
console.tutorial.keytext.mmode=Activates M-Mode imaging. B-MODE dial controls M-Mode Gain. UPDATE button activates M-Mode Sweep.
console.tutorial.keyname.freq=FREQUENCY Rocker Switch
console.tutorial.keytext.freq=Adjusts the 2D image Frequency UP or DOWN:\n\n- Harmonics (if available)\n- Resolution (high frequency)\n- General\n- Penetration (low frequency)\n- EPI (Extended Pulse Imaging) (greater penetration).
console.tutorial.keyname.zoom=ZOOM Rocker Switch
console.tutorial.keytext.zoom=Adjusts the 2D magnification UP (more magnification) or DOWN (less magnification). Trackball used to pan image.
console.tutorial.keyname.depth=DEPTH Rocker Switch
console.tutorial.keytext.depth=Adjusts the 2D imaging Depth UP (less Depth) or DOWN (more Depth).
console.tutorial.keyname.focus=FOCUS Rocker Switch
console.tutorial.keytext.focus=Adjusts the location of the image focal zone UP or DOWN on the image field.
console.tutorial.keyname.color=COLOR Doppler Button/Dial
console.tutorial.keytext.color=Activates (press dial) Color Doppler imaging mode and controls Color Doppler Gain (turn dial). Controls Power Doppler Gain.
console.tutorial.keyname.wf=WF Rocker Switch
console.tutorial.keytext.wf=Adjusts the Color Doppler Wall Filter UP (more filtering) or DOWN (less filtering).
console.tutorial.keyname.colorprf=PRF Rocker Switch
console.tutorial.keytext.colorprf=Adjusts the Color Doppler PRF (Pulse Repetition Frequency) UP (higher PRF) or DOWN (lower PRF).
console.tutorial.keyname.colorinvert=INVERT Button
console.tutorial.keytext.colorinvert=Reverses the direction of the Color Doppler Map.
console.tutorial.keyname.steer=STEER Rocker Switch
console.tutorial.keytext.steer=Adjusts the steering angle dependent on the active imaging mode:\n\n- Color Doppler Region of Interest (ROI) box\n- PW Doppler sample line\n- B-Mode/2D beam on linear transducers.
console.tutorial.keyname.powerdoppler=POWER DOPPLER Button
console.tutorial.keytext.powerdoppler=Activates/deactivates the Color Power Doppler imaging mode. The COLOR DOPPLER dial controls the Color Power Gain.
console.tutorial.keyname.pw=PULSED DOPPLER Button/Dial
console.tutorial.keytext.pw=Activates/deactivates (press dial) Pulsed Wave (PW) Doppler imaging mode and controls PW Doppler Gain (turn dial).\nUPDATE button switches between Trace and 2D image.\n\nNote: To adjust the PW gate size on full screen 2D/Doppler cursor, turn the PULSED DOPPLER dial.
console.tutorial.keyname.cw=CW Button
console.tutorial.keytext.cw=Activates/deactivates Continuous Wave (CW) Doppler function.\nPW button/dial adjusts CW Gain.
console.tutorial.keyname.pwbase=BASE Rocker Switch
console.tutorial.keytext.pwbase=Adjusts PW/CW Doppler Trace Baseline UP or DOWN.
console.tutorial.keyname.pwprf=PRF Rocker Switch
console.tutorial.keytext.pwprf=Adjusts PW/CW Doppler PRF UP (higher PRF) or DOWN (lower PRF).
console.tutorial.keyname.pwinvert=INVERT Button
console.tutorial.keytext.pwinvert=Reverses direction of PW/CW Doppler Trace.
console.tutorial.keyname.angle=ANGLE CORRECT Button/Dial
console.tutorial.keytext.angle=Activates (press dial) PW/CW angle correct feature. Each subsequent press toggles through 0, +60, -60 degrees. Turn dial right or left to adjust angle correct in 2 degree increments up or down.
console.tutorial.keyname.research=RESEARCH Button
console.tutorial.keytext.research=Not available in this release.
console.tutorial.keyname.worksheet=WORKSHEET Button
console.tutorial.keytext.worksheet=Presents the active Worksheet on the LCD display with associated options on the touch screen.
console.tutorial.keyname.elasto=ELASTOGRAPHY Button
console.tutorial.keytext.elasto=Activates/deactivates Elastography imaging mode.
console.tutorial.keyname.compound=SPATIAL COMPOUND Button
console.tutorial.keytext.compound=Activates/deactivates Spatial Compounding imaging mode.
console.tutorial.keyname.3d=3D/4D Button
console.tutorial.keytext.3d=Activates/deactivates optional Standard and Advanced 3D/4D imaging modes.
console.tutorial.keyname.optimize=OPTIMIZE Button
console.tutorial.keytext.optimize=Adjusts scale and Gain of Doppler spectrum to optimal.
console.tutorial.keyname.power=ACOUSTIC POWER Button/Dial
console.tutorial.keytext.power=Adjusts (turn dial) Acoustic Power and toggles (press dial) MI, TIS, TIC, TIB display depending on the active imaging mode.\n\nWarning: Refer to A.1.1 ALARA Principle and Output Displays.
console.tutorial.keyname.tgc=TGC Slide Pods
console.tutorial.keytext.tgc=Adjusts TGC (Time Gain Compensation) curve.
console.tutorial.keyname.volume=AUDIO VOLUME Dial
console.tutorial.keytext.volume=Adjusts Doppler signal volume.
console.tutorial.keyname.lcdencoder=Touch Screen Dials
console.tutorial.keytext.lcdencoder=Five (5) dials that control touch screen options which change depending on the imaging mode/state. Once the touch screen option is tapped, turn the dial to make the relevant adjustments.\n\nNote: In measure mode, if the Method button is available on the touch screen, the measurement can be performed in two or more ways. After selecting a measurement, tap Method and turn the relevant touch screen dial to page through the various choices available. The Method selected appears in an information bubble to the bottom right of the image screen. Refer to Chapter 6: Clinical Analysis for further details on measurements.

videoplayer.msg.rendererror=The file %s can not be played. The Player might not support the file type or might not support the codec that was used to compress the file, or the file is corrupted.

robot.controlpanel.version=Version
robot.settingsdlg.title=ROBOT SETTINGS

status.probesensor.nosensor=WARNING: Temperature sensor not available!
status.probesensor.maxtemp=WARNING: Max temperature reached!
status.probesensor.mintemp=WARNING: Probe temperature sensor error! 

edusonixdlg.title=SONIXCAM TITLE SCREEN
edusonix.endscreen1=A SonixCAM Production
edusonix.endscreen2=
edusonix.msg.processingfinished=Processing Finished
edusonix.msg.processing=Processing...
edusonix.failed.copy=File copy failed
edusonix.failed.camstudio=Camstudio failed to start.
edusonix.failed.webcam=Webcam failed to initialize.

sonixdvr.options=SonixDVR Options
sonixcam.options=SonixCAM Options

balloon.cineacquisition.header=Cine Acquisition
balloon.cineframes.msg=At least one frames must be selected to record a cine.
balloon.cineresources.msg=There are not enough system resources\nto perform a recording of this size.
balloon.cineresrouceslow.msg=There are not enough available system resources to record the cine.
balloon.chatsupport.header=Chat Support
balloon.noconnection.msg=A connection could not be established.\nEnsure that the system is connected to the internet.
balloon.missingchatcontacts.msg=Please add chat support team members.
balloon.internetupdate.header=Internet Update
balloon.failedupdateutility.msg=Unable to run the update utility.
balloon.chatconnecting.msg=Connecting...
balloon.panoramic.header=Panoramic
panoramic.measurements.warning=Measurements performed on an acquired Panoramic image may be inaccurate as the accuracy of the geometric re-composition is very user-dependent.\nMeasurements performed on an acquired Panoramic image should be used for informational purposes only.
balloon.failedpanoramicprogressbar.msg=Unable to create Panoramic progress bar.
balloon.failedpanoramicbuffers.msg=Unable to load panoramic image buffers.
balloon.notenoughpanoramicimages.msg=The number of images acquired was too small.\nAt least 5 images must be acquired.
balloon.failedcreatepanoramicimage.msg=Unable to create the panoramic image.
balloon.badpanoramicscan.msg=The scan was not accurate.\nThe panoramic image may contain defects.
balloon.zonecycled.header=Zone: %s
balloon.zonecycled.msg=Cycle value = %d
balloon.invalidzonecontainer.msg=The zone container, %s, has and invalid Container ID of %d;\nthe Container ID must be greater than %d.
balloon.recordinginprogress.msg=Recording in progress. Please shutdown after it has completed.
balloon.3dinprogress.msg=A 3D acquisition is in progress. Please shutdown after it has completed.
balloon.panoramicinprogress.msg=A Panoramic acquisition is in progress. Please shutdown after it has completed.
balloon.cdrecordinginprogress.msg=CD/DVD archiving is in progress. Please shutdown after it has completed.
balloon.ftpinprogress.msg=FTP transfer in progress. Please shutdown after it has completed.
balloon.console.header=Console
balloon.consolestarted.msg=Successfully started the console.
balloon.consolefailed.msg=Failed to start the console.
balloon.battery.fault.header=Charger Fault detected. Reboot battery.
balloon.battery.fault.msg1=1. Power off the system and unplug the power cord from the wall outlet.
balloon.battery.fault.msg2=2. Press and hold the battery F (FUNCTION) button for 5 seconds.
balloon.battery.fault.msg3=    NOTE: All lights on the control panel will go out.
balloon.battery.fault.msg4=3. Wait five (5) seconds, plug the power cord into a wall outlet and turn on the system.
balloon.battery.fault.msg5=
balloon.battery.fault.msg6=If the battery's Charger Fault red LED is still lit, contact Ultrasonix Technical Support.
balloon.fastboot.header=Fast Boot
balloon.fastboot.success.msg=Successfully returned from %s.
balloon.fastboot.failed.msg=Failed to return from %s. Please restart the system.
balloon.3dimaging.header=3D Imaging
balloon.3dnotconfigured.msg=The 3D feature is either not enabled or not fully configured.
balloon.dicom.header=DICOM
balloon.dicomfailedcreation.msg=Failed to create DICOM object.
balloon.researchactivated.msg=Research Mode has been activated.
balloon.dicomfailedconnect.msg=Failed to connect to DICOM server: %s
balloon.sonixlive.header=SonixLIVE
balloon.sonixlivenotavailable.msg=This feature is not available.
balloon.sonixlivestopped.msg=Stopped
balloon.sonixlivestarted.msg=Started
balloon.sonixlivefailed.msg=Failed to start.
balloon.sonixlive.cannotrecord.msg=Unable to start SonixLive because SonixCam or SonixDVR is already running.
balloon.sonixdvr.header=SonixDVR
balloon.sonixdvrstopped.msg=Recording stopped
balloon.sonixdvrstarted.msg=Recording started
balloon.sonixdvr.cannotrecord.msg=Unable to start SonixDVR because SonixCam or SonixLive is already running.
balloon.measurements.header=Measurements
balloon.measurementtypechanged.msg=%s set to '%s'
balloon.worklistdisabled.msg=The worklist is not enabled.
balloon.cannotclearpatient.msg=The patient data cannot be cleared.
balloon.noactiveexam.msg=There is currently no active exam that needs to be ended.
balloon.patientlocalrecord.msg=No local patient record has been selected for deletion.
balloon.patientnodata.msg=The selected patient has no reviewable data.
balloon.missingpatientdata.msg=A Patient ID, Last Name or First Name must first be provided before creating a patient.
balloon.measurementsmovedtofetusa.msg=Existing measurements have been assigned to fetus A.
balloon.dicomstorage.header=DICOM Storage
balloon.dicomstorefailed.msg=Failed to store %d of %d objects to the DICOM Storage Server.
balloon.dicomstoresucceeded.msg=Successfully stored %d of %d objects to the DICOM Storage Server.
balloon.nobiopsy.msg=Biopsy Guide Not Available.
balloon.trusgridsaved.msg=Grid position saved.
balloon.shutdownstanbywarn.msg=The system should not be unplugged after shutting down using standby.
balloon.sharedfolderwarn.msg=Sharing Patient Information is a Potential Security Hazard.
balloon.sonixgps.header=SonixGPS
balloon.matlab.header=MATLAB Opening
balloon.matlabopening.msg=Please wait for the data file to open.
balloon.ftptransfer.header=FTP Transfer
balloon.ftpfailedopenstudy.msg=Failed to open study.xml.
balloon.ehealthconxuploadfailed.msg=EHealthConx upload failed.
balloon.operatoremailmissing.msg=Operator email not found.
balloon.ehealthconxsuccessful.msg=EHealthConx upload was successful.
balloon.worksheetreview.header=Worksheet Review
balloon.reviewworksheetreminder.msg=Review the worksheet before ending exam.
balloon.noepidural.msg=Epidural Guide Not Available.
balloon.reslice3dprobenotsupported=This probe is not supported by this mode.
balloon.bcad.header=B-CAD
balloon.bcad.segmentation.failed=Segmentation failed or aborted
balloon.bcad.manualedit.nolesioneditable=No lesion is editable
balloon.bcad.finetune.na=Either the selected lesion does not exist or is not adjustable.
balloon.bcad.finetune.single=There is only one candidate contour.
balloon.autofollicle.header=Auto Follicle
balloon.autofollicle.finetune.na=The selected follicle is not adjustable.
balloon.sonixcam.header=SonixCAM
balloon.sonixcam.recording.msg=Unable to perform this action because SonixCAM is recording.
balloon.sonixcam.cannotrecord.msg=Unable to start SonixCAM because SonixGPS, SonixDVR or SonixLive is already running.
balloon.sonixgps.cannotstart.msg=Unable to start SonixGPS because SonixCam is already running.
balloon.filenameformat.header=Empty File Name
balloon.filenameformat.emptystagename=Either Auto-Label is not enabled or no labels are configured.

organregscheme3p.title=Scheme 3P
organregscheme1p.title=Scheme 1P

oa.laser.energyshort=Laser Energy (Short):
oa.laser.energylong=Laser Energy (Long):
oa.laser.temperature=Laser Temperature:
oa.laser.framerate=Laser Frame Rate:

organreg.msg.cancelled=Registration cancelled.
organreg.msg.started=Registration started.
organreg.msg.notdone=Organ registration is not done yet.
organreg.msg.scheme3p.p1=Scheme 3P: click to place the first point (%s)
organreg.msg.scheme3p.p2=Scheme 3P: click to place the second point (%s)
organreg.msg.scheme3p.p3=Scheme 3P: click to place the third point (%s)
organreg.msg.scheme3p.unknown=Scheme 3P: Organ registration is not started.
organreg.msg.done=Organ registration is done.\n%s
organreg.msg.scheme1p.position=Scheme 1P: click to set the position (%s)
organreg.msg.scheme1p.unknown=Scheme 1P: Organ registration is not started.
organreg.msg.3fiducialrequired=Three (3) fiducial sensors are required to start organ registration.
organreg.msg.scheme.3p=%s:\n    Landmark 1: %s\n    Landmark 2: %s\n    Landmark 3: %s
organreg.msg.scheme.singleline3p=%s Landmarks 1: %s    2: %s    3: %s
organreg.msg.scheme.1p=%s:\n    Landmark: %s
organreg.msg.scheme.singleline1p=%s Landmark: %s

product.description.notset=Not Set

autoFollicle.buttonText.AutoMethod=Auto-Method
autoFollicle.buttonText.ExitAutoMethod=Exit Auto-\nMethod
autoFollicle.instruction.tablet=Tap follicle center to take \r\nan auto-measurement.
